TE Connectivity Transparent Polyolefin Solder Sleeve 35.5mm Length 4 → 11.5mm Cable Diameter
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
TE ConnectivityMinimum Cable Diameter
4mm
Maximum Cable Diameter
11.5mm
Sleeve Length
35.5mm
Material
Polyolefin
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Quantity
2
Colour
Transparent
Shrink Temperature
+85°C
Series
B-155
Standards Met
ANSI J-STD-004, ANSI J-STD-006
Päritoluriik
Mexico
Toote üksikasjad
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
€ 3,10
tk (pakis 25) (ilma käibemaksuta)
€ 3,782
tk (pakis 25) (koos käibemaksuga)
25
€ 3,10
tk (pakis 25) (ilma käibemaksuta)
€ 3,782
tk (pakis 25) (koos käibemaksuga)
25
Osta lahtiselt
| kogus | Ühikuhind | Per Pakend |
|---|---|---|
| 25 - 350 | € 3,10 | € 77,50 |
| 375 - 1225 | € 2,95 | € 73,75 |
| 1250+ | € 2,80 | € 70,00 |
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
TE ConnectivityMinimum Cable Diameter
4mm
Maximum Cable Diameter
11.5mm
Sleeve Length
35.5mm
Material
Polyolefin
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Quantity
2
Colour
Transparent
Shrink Temperature
+85°C
Series
B-155
Standards Met
ANSI J-STD-004, ANSI J-STD-006
Päritoluriik
Mexico
Toote üksikasjad
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.