Hydraulic End Sleeves

Hydraulic end sleeves are a type of spacer used in flared-tube hydraulic fittings. The end sleeve slides onto the tube before it's flared. A range of flaring tools can be used to create a flared tube end, usually at an angle of 37°. The hydraulic end sleeve sits between the flared tube end and the threaded nut, helping to hold the nut in the correct position. The fitting nose forms a seal with the tube end when the nut is tightened.

What are hydraulic end sleeves used for?

This type of fitting is ideally suited to low- and medium-pressure applications, for use with machine tools, agricultural equipment, earth moving machinery, automation, chemical processing systems and other hydraulic applications.

Types of hydraulic end sleeves

Hydraulic end sleeves are most commonly made of zinc-plated steel and come in varying sizes. Product specifications include external tube diameter and sleeve length (in millimetres). Like the other components of a flared fitting, you'll need to check the end sleeves have the correct specifications. These include maximum operating pressure (in bars) and maximum and minimum operating temperature. Working pressures will vary somewhat depending on tube and fitting size.

4
Vasted
Sinu uued valikud
Klõpsa "Lisa filtrid", et näha uusi tooteid.
Rakendatud filtrid
Vaatate 1 - 4 4 leitud tootest
Kuva:
Tulemusi leheküljel
20
  • 20
  • 50
  • 100
Hind
(Kuvatud hind ei sisalda KM)
Täpsem kirjeldus For Tube Outside Diameter Stock Overall Length
Hydraulic flare tube end sleeve,12mm OD
  • € 0,492
  • tk (pakis 10)
  • Võrdle
12mm Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
Kontrolli laoseisu 14mm Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
Hydraulic flare tube end sleeve,20mm OD
  • € 1,85
  • tk (pakis 10)
  • Võrdle
20mm Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
Kontrolli laoseisu 17mm Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
Hydraulic flare tube end sleeve,6mm OD
  • € 0,743
  • tk (pakis 10)
  • Võrdle
6mm Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
Kontrolli laoseisu 10mm Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
Hydraulic flare tube end sleeve,8mm OD
  • € 0,80
  • tk (pakis 10)
  • Võrdle
8mm Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
Kontrolli laoseisu 11mm Please note that the Stock level on this page is periodically updated during the day.

To get the current Stock level, please click on the Product Number that you are interested in.
Vaata laoseisu
Sisesta soovitud kogus ja kliki "vaata". Laoseisu on uuendatud
. Laoinfo uueneb kord päevas, seega võib kuvatav laoseis sõltuvalt kellaajast olla erinev.
RS kood:
Otsin 
Compare list full
Saad võrrelda ainult 8 toodet korraga

Vaata tooteid või eemalda need valikust
Vaatate 1 - 4 4 leitud tootest