IDEM MSA Series Magnetic Non-Contact Safety Switch, 24V dc, 316 Stainless Steel Housing, 2NC, 2m Cable
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
IDEMSupply Voltage
24V dc
Safety Contacts
2NC
Housing Material
316 Stainless Steel
Connection Type
2m Cable
Actuator Type
Master Coded
Auxiliary Contacts
NC
Safety Category
4
Sensor Principle
Magnetic
Actuator Included
Yes
Switching Distance
10 (Close) mm, 15 (Open) mm
Series
MSA
IP Rating
IP67, IP69K
Supply Current
100mA
Number of Approach Directions
2
Depth
27mm
Width
38mm
Length
95mm
Päritoluriik
United Kingdom
Toote üksikasjad
IDEM MSA Standalone Coded Non Contact Switches
The MSA Non-contact Coded Switches have been developed as standalone mountable devices to provide a high level of fault detection and functional safety.
These non-contact switches can be mounted to guard doors to provide and maintain a high level of functional safety without the need to connect to a safety relay or safety controller. They have their own internal monitoring system and use force guided mechanical contacts which maintain PLe/Category 4 (ISO13849-1) even when the switches are connected in series.
Made from stainless steel 316 with a mirror polished (Ra4) surface finish these safety switches are suitable for CIP and SIP process applications and have IP69K ingress protection.
The typical sensing distance of the switch when it is "on" is 12mm, with wide tolerance to guard misalignment after setting.
Standards
High Functional Safety to ISO13849-1 - up to PLe/Cat 4. Conformance to EN60947-5-3 PDF-M.
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
€ 271,00
tk (ilma käibemaksuta)
€ 330,62
tk (koos käibemaksuga)
1
€ 271,00
tk (ilma käibemaksuta)
€ 330,62
tk (koos käibemaksuga)
1
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
IDEMSupply Voltage
24V dc
Safety Contacts
2NC
Housing Material
316 Stainless Steel
Connection Type
2m Cable
Actuator Type
Master Coded
Auxiliary Contacts
NC
Safety Category
4
Sensor Principle
Magnetic
Actuator Included
Yes
Switching Distance
10 (Close) mm, 15 (Open) mm
Series
MSA
IP Rating
IP67, IP69K
Supply Current
100mA
Number of Approach Directions
2
Depth
27mm
Width
38mm
Length
95mm
Päritoluriik
United Kingdom
Toote üksikasjad
IDEM MSA Standalone Coded Non Contact Switches
The MSA Non-contact Coded Switches have been developed as standalone mountable devices to provide a high level of fault detection and functional safety.
These non-contact switches can be mounted to guard doors to provide and maintain a high level of functional safety without the need to connect to a safety relay or safety controller. They have their own internal monitoring system and use force guided mechanical contacts which maintain PLe/Category 4 (ISO13849-1) even when the switches are connected in series.
Made from stainless steel 316 with a mirror polished (Ra4) surface finish these safety switches are suitable for CIP and SIP process applications and have IP69K ingress protection.
The typical sensing distance of the switch when it is "on" is 12mm, with wide tolerance to guard misalignment after setting.
Standards
High Functional Safety to ISO13849-1 - up to PLe/Cat 4. Conformance to EN60947-5-3 PDF-M.