Microchip HV9120P-G, PWM Controller, 13.5 V, 3 MHz 16-Pin, PDIP

RS tootekood: 178-4853Bränd: MicrochipTootja Part nr.: HV9120P-G
brand-logo
Kuva kõik kategoorias PWM

Tehnilised dokumendid

Spetsifikatsioonid:

Maximum Switching Frequency

3 MHz

Output Voltage

4.16 V

Output Current

10 mA

Number of Outputs

1

Control Method

Current, Voltage

Fall Time

75ns

Mounting Type

Through Hole

Rise Time

75ns

Package Type

PDIP

Pin Count

16

Maximum Duty Cycle

49.6%

Dimensions

0.81 x 0.28 x 0.195in

Length

20.57mm

PWM Controller Type

Current Mode

Width

0.28in

Height

4.95mm

Maximum Operating Supply Voltage

13.5 V

Minimum Operating Temperature

-55 °C

Minimum Operating Supply Voltage

9 V

Maximum Operating Temperature

+125 °C

Toote üksikasjad

HV912x Series High-Voltage Current-Mode PWM Controllers

The Microchip HV912x range of high-voltage current-mode PWM controllers are Switch Mode Power Supply (SMPS) controller subsystems that can start and run directly from almost any DC input such as 12V batteries and a rectified and filtered 240VAC line.

These devices can self-start directly from a high voltage input and subsequently take the power to operate from one of the outputs of the converter it is controlling, allowing very efficient operation while maintaining input-to-output galvanic isolation limited in voltage only by the insulation system of the associated magnetic assembly. A ±2% internal bandgap reference, internal operational amplifier, very high speed comparator, and output buffer allow production of rugged, high performance, high efficiency power supplies of 50W or more, which can still be over 80% efficient at outputs of 1.0W or less. Remote on/off controls allow either latching or nonlatching remote shutdown. During shutdown, the power required is under 6.0mW.

PWM (Pulse Width Modulation) Controllers, Microchip

Ideate. Create. Collaborate

JOIN FOR FREE

No hidden fees!

design-spark
design-spark
  • Download and use our DesignSpark software for your PCB and 3D Mechanical designs
  • View and contribute website content and forums
  • Download 3D Models, Schematics and Footprints from more than a million products
Click here to find out more

Lao andmed ajutiselt ei ole saadaval.

Palun kontrollige hiljem uuesti.

Lao andmed ajutiselt ei ole saadaval.

€ 2,50

tk (torus 24) (ilma käibemaksuta)

€ 3,05

tk (torus 24) (koos käibemaksuga)

Microchip HV9120P-G, PWM Controller, 13.5 V, 3 MHz 16-Pin, PDIP

€ 2,50

tk (torus 24) (ilma käibemaksuta)

€ 3,05

tk (torus 24) (koos käibemaksuga)

Microchip HV9120P-G, PWM Controller, 13.5 V, 3 MHz 16-Pin, PDIP
Lao andmed ajutiselt ei ole saadaval.

Ideate. Create. Collaborate

JOIN FOR FREE

No hidden fees!

design-spark
design-spark
  • Download and use our DesignSpark software for your PCB and 3D Mechanical designs
  • View and contribute website content and forums
  • Download 3D Models, Schematics and Footprints from more than a million products
Click here to find out more

Tehnilised dokumendid

Spetsifikatsioonid:

Maximum Switching Frequency

3 MHz

Output Voltage

4.16 V

Output Current

10 mA

Number of Outputs

1

Control Method

Current, Voltage

Fall Time

75ns

Mounting Type

Through Hole

Rise Time

75ns

Package Type

PDIP

Pin Count

16

Maximum Duty Cycle

49.6%

Dimensions

0.81 x 0.28 x 0.195in

Length

20.57mm

PWM Controller Type

Current Mode

Width

0.28in

Height

4.95mm

Maximum Operating Supply Voltage

13.5 V

Minimum Operating Temperature

-55 °C

Minimum Operating Supply Voltage

9 V

Maximum Operating Temperature

+125 °C

Toote üksikasjad

HV912x Series High-Voltage Current-Mode PWM Controllers

The Microchip HV912x range of high-voltage current-mode PWM controllers are Switch Mode Power Supply (SMPS) controller subsystems that can start and run directly from almost any DC input such as 12V batteries and a rectified and filtered 240VAC line.

These devices can self-start directly from a high voltage input and subsequently take the power to operate from one of the outputs of the converter it is controlling, allowing very efficient operation while maintaining input-to-output galvanic isolation limited in voltage only by the insulation system of the associated magnetic assembly. A ±2% internal bandgap reference, internal operational amplifier, very high speed comparator, and output buffer allow production of rugged, high performance, high efficiency power supplies of 50W or more, which can still be over 80% efficient at outputs of 1.0W or less. Remote on/off controls allow either latching or nonlatching remote shutdown. During shutdown, the power required is under 6.0mW.

PWM (Pulse Width Modulation) Controllers, Microchip

Ideate. Create. Collaborate

JOIN FOR FREE

No hidden fees!

design-spark
design-spark
  • Download and use our DesignSpark software for your PCB and 3D Mechanical designs
  • View and contribute website content and forums
  • Download 3D Models, Schematics and Footprints from more than a million products
Click here to find out more