Tehnilised dokumendid
Spetsifikatsioonid:
Brand
MicrochipNumber of Supervisors
1
Output Driver
Active Low, Open Drain
Mounting Type
Surface Mount
Maximum Reset Active Time
700ms
Package Type
SOT-23
Pin Count
3
Dimensions
2.9 x 1.3 x 0.95mm
Maximum Monitored Voltage
3V
Maximum Operating Supply Voltage
5.5 V
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
Minimum Operating Supply Voltage
1 V
Minimum Monitored Voltage
2.92V
Päritoluriik
Thailand
Toote üksikasjad
MCP130 Microcontroller Supervisory and Reset Circuit
The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor.
Supervisory & Reset Circuits - Microchip
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
€ 0,624
tk (rullis) (ilma käibemaksuta)
€ 0,761
tk (rullis) (koos käibemaksuga)
Tootmispakett (Rull)
10
€ 0,624
tk (rullis) (ilma käibemaksuta)
€ 0,761
tk (rullis) (koos käibemaksuga)
Tootmispakett (Rull)
10
Osta lahtiselt
kogus | Ühikuhind | Per Rull |
---|---|---|
10 - 20 | € 0,624 | € 6,24 |
30 - 90 | € 0,582 | € 5,82 |
100+ | € 0,549 | € 5,49 |
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
MicrochipNumber of Supervisors
1
Output Driver
Active Low, Open Drain
Mounting Type
Surface Mount
Maximum Reset Active Time
700ms
Package Type
SOT-23
Pin Count
3
Dimensions
2.9 x 1.3 x 0.95mm
Maximum Monitored Voltage
3V
Maximum Operating Supply Voltage
5.5 V
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
Minimum Operating Supply Voltage
1 V
Minimum Monitored Voltage
2.92V
Päritoluriik
Thailand
Toote üksikasjad
MCP130 Microcontroller Supervisory and Reset Circuit
The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor.