Tehnilised dokumendid
Spetsifikatsioonid:
Brand
Phoenix ContactModule Type
Temperature Converter
Input Signal Type
RTD
Output Signal Type
Current, Voltage
Input Range
0 → 4000 Ω, -200 → +850°C
Output Range
0 → 10 V, 0 → 20 mA, 0 → 5 V, 1 → 5 V, 10 → 0 V, 20 → 0 mA, 20 → 4 mA, 4 → 20mA
Supply Voltage
9.6 → 30V dc
Hazardous Area Certification
ATEX
Mounting Type
DIN Rail Mount
Operating Temperature Range
-20 → +65°C
Series
3RS7025
Standards Met
UL
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+65°C
Päritoluriik
Germany
Toote üksikasjad
Configurable Resistance Thermometer Transducer
The 2902849 from Phoenix Contact is a 3-way, configurable isolated temperature transducer. This temperature transducer is designed to be used with resistance thermometers and remote resistance type sensors in 2,3 and 4-wire connections. 2902849 also allows easy customisation and configuration either by the DIP switch located on the side of the module or via the S port using FGT/DTM software. Not to mention, this module is rated to be installed in zone 2 areas.
This device also contains a red LED to allow for easy error diagnostics. It will flash or stay static depending on the error.
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
€ 219,00
tk (ilma käibemaksuta)
€ 267,18
tk (koos käibemaksuga)
1
€ 219,00
tk (ilma käibemaksuta)
€ 267,18
tk (koos käibemaksuga)
1
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
Phoenix ContactModule Type
Temperature Converter
Input Signal Type
RTD
Output Signal Type
Current, Voltage
Input Range
0 → 4000 Ω, -200 → +850°C
Output Range
0 → 10 V, 0 → 20 mA, 0 → 5 V, 1 → 5 V, 10 → 0 V, 20 → 0 mA, 20 → 4 mA, 4 → 20mA
Supply Voltage
9.6 → 30V dc
Hazardous Area Certification
ATEX
Mounting Type
DIN Rail Mount
Operating Temperature Range
-20 → +65°C
Series
3RS7025
Standards Met
UL
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+65°C
Päritoluriik
Germany
Toote üksikasjad
Configurable Resistance Thermometer Transducer
The 2902849 from Phoenix Contact is a 3-way, configurable isolated temperature transducer. This temperature transducer is designed to be used with resistance thermometers and remote resistance type sensors in 2,3 and 4-wire connections. 2902849 also allows easy customisation and configuration either by the DIP switch located on the side of the module or via the S port using FGT/DTM software. Not to mention, this module is rated to be installed in zone 2 areas.
This device also contains a red LED to allow for easy error diagnostics. It will flash or stay static depending on the error.