RS PRO Solder Tag Board with 40 Contacts for Raspberry Pi
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
RS ProProduct Name
Solder Tag Board with 40 Contacts for Raspberry Pi
Accessory Category
Prototyping
Form Factor
Addon
Päritoluriik
United Kingdom
Toote üksikasjad
Solder Tag Board for Raspberry Pi
This solder tag board is designed to work with the Raspberry Pi. The terminals on the board match the pins on the Pi. With a total of 40 terminals it provides a simple means of soldering and de-soldering electronic components to the GPIO header when developing prototypes.
Ideal for electronics engineers developing prototypes and also helpful for electronics students and apprentices.
The holes in the tag board align with the mounting holes in the Pi allowing the tag board to be mounted beneath the Pi using an additional mounting kit consisting of 4 legs and 8 x 2mm Pozidriv screws. For the 4 leg mounting kit, please see RS 124-3364.
A central slot in the tag board allows a ribbon cable, connected to the Pi GPIO socket, to pass through. For a suitable ribbon with connector, please see RS 124-2929.
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
€ 5,70
tk (ilma käibemaksuta)
€ 6,95
tk (koos käibemaksuga)
1
€ 5,70
tk (ilma käibemaksuta)
€ 6,95
tk (koos käibemaksuga)
1
Osta lahtiselt
| kogus | Ühikuhind |
|---|---|
| 1 - 9 | € 5,70 |
| 10 - 99 | € 5,20 |
| 100+ | € 4,85 |
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
RS ProProduct Name
Solder Tag Board with 40 Contacts for Raspberry Pi
Accessory Category
Prototyping
Form Factor
Addon
Päritoluriik
United Kingdom
Toote üksikasjad
Solder Tag Board for Raspberry Pi
This solder tag board is designed to work with the Raspberry Pi. The terminals on the board match the pins on the Pi. With a total of 40 terminals it provides a simple means of soldering and de-soldering electronic components to the GPIO header when developing prototypes.
Ideal for electronics engineers developing prototypes and also helpful for electronics students and apprentices.
The holes in the tag board align with the mounting holes in the Pi allowing the tag board to be mounted beneath the Pi using an additional mounting kit consisting of 4 legs and 8 x 2mm Pozidriv screws. For the 4 leg mounting kit, please see RS 124-3364.
A central slot in the tag board allows a ribbon cable, connected to the Pi GPIO socket, to pass through. For a suitable ribbon with connector, please see RS 124-2929.