STMicroelectronics L298P013TR, Brushed Motor Driver IC, 46 V 4A 20-Pin, PowerSO
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
STMicroelectronicsMotor Type
Brushed DC
Output Configuration
Dual Full Bridge
Maximum IGBT Collector Current
4A
Maximum Collector Emitter Voltage
46 V
Mounting Type
Surface Mount
Package Type
PowerSO
Maximum Operating Supply Voltage
46 V
Pin Count
20
Minimum Operating Supply Voltage
4.8 V
Typical Switching Frequency
25kHz
Maximum Operating Temperature
+130 °C
Length
16mm
Height
3.3mm
Width
11.1mm
Dimensions
16 x 11.1 x 3.3mm
Minimum Operating Temperature
-25 °C
Päritoluriik
Malaysia
Toote üksikasjad
L298 Dual Full Bridge Motor Driver
ST Microelectronics presents its L298 dual full bridge driver series. The L298 series from ST is an integrated high voltage, high current dual full bridge driver. These devices are specially designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that allow the L298 to be enabled or disabled independently of the input signals. The emitters of the lower transistors of each bridge are connected together, the corresponding external terminal can be used to connect an external sensing resistor. In addition, a supply input is provided so that the logic works at a lower voltage.
Motor Controllers & Drivers, STMicroelectronics
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
€ 282,50
€ 11,30 tk (rullis) (ilma käibemaksuta)
€ 344,65
€ 13,786 tk (rullis) (koos käibemaksuga)
Tootmispakett (Rull)
25
€ 282,50
€ 11,30 tk (rullis) (ilma käibemaksuta)
€ 344,65
€ 13,786 tk (rullis) (koos käibemaksuga)
Tootmispakett (Rull)
25
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
| kogus | Ühikuhind | Per Rull |
|---|---|---|
| 25 - 45 | € 11,30 | € 56,50 |
| 50 - 120 | € 10,70 | € 53,50 |
| 125 - 245 | € 10,10 | € 50,50 |
| 250+ | € 9,70 | € 48,50 |
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
STMicroelectronicsMotor Type
Brushed DC
Output Configuration
Dual Full Bridge
Maximum IGBT Collector Current
4A
Maximum Collector Emitter Voltage
46 V
Mounting Type
Surface Mount
Package Type
PowerSO
Maximum Operating Supply Voltage
46 V
Pin Count
20
Minimum Operating Supply Voltage
4.8 V
Typical Switching Frequency
25kHz
Maximum Operating Temperature
+130 °C
Length
16mm
Height
3.3mm
Width
11.1mm
Dimensions
16 x 11.1 x 3.3mm
Minimum Operating Temperature
-25 °C
Päritoluriik
Malaysia
Toote üksikasjad
L298 Dual Full Bridge Motor Driver
ST Microelectronics presents its L298 dual full bridge driver series. The L298 series from ST is an integrated high voltage, high current dual full bridge driver. These devices are specially designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that allow the L298 to be enabled or disabled independently of the input signals. The emitters of the lower transistors of each bridge are connected together, the corresponding external terminal can be used to connect an external sensing resistor. In addition, a supply input is provided so that the logic works at a lower voltage.
Motor Controllers & Drivers, STMicroelectronics
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products