CML Innovative Technologies Bi-Pin Indicator Light, Clear, 6 V, 60 mA, 3000h
Tehnilised dokumendid
Spetsifikatsioonid:
Voltage Rating
6 V
Lamp Base
Bi-Pin
Current Rating
60 mA
Diameter
4.26mm
Lamp Size
T1 1/4
Lens Colour
Clear
Luminosity
1.6 lm
Life Hours
3000h
Toote üksikasjad
T-1 (4mm) Bi-Pin
A range of T-1 1/4 (4mm) Bi-pin filament indicators, specifically intended for illumination in confined spaces, e.g. meters, switches, etc.
Wire-Ended & Bi-Pin
Filament lamps will perform to specification and give optimum life when:,a) They are powered at the rated voltage from a stabilised 50Hz ac supply,b) Ambient temperature is in the range 20 to 25°C,c) No mechanical vibration is present.,Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA). Operation from a dc supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care therefore should be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
€ 13,50
€ 1,35 tk (pakis 10) (ilma käibemaksuta)
€ 16,47
€ 1,647 tk (pakis 10) (koos käibemaksuga)
10
€ 13,50
€ 1,35 tk (pakis 10) (ilma käibemaksuta)
€ 16,47
€ 1,647 tk (pakis 10) (koos käibemaksuga)
10
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
Tehnilised dokumendid
Spetsifikatsioonid:
Voltage Rating
6 V
Lamp Base
Bi-Pin
Current Rating
60 mA
Diameter
4.26mm
Lamp Size
T1 1/4
Lens Colour
Clear
Luminosity
1.6 lm
Life Hours
3000h
Toote üksikasjad
T-1 (4mm) Bi-Pin
A range of T-1 1/4 (4mm) Bi-pin filament indicators, specifically intended for illumination in confined spaces, e.g. meters, switches, etc.
Wire-Ended & Bi-Pin
Filament lamps will perform to specification and give optimum life when:,a) They are powered at the rated voltage from a stabilised 50Hz ac supply,b) Ambient temperature is in the range 20 to 25°C,c) No mechanical vibration is present.,Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA). Operation from a dc supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care therefore should be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.