Telemecanique Sensors Pressure Switch, 0bar Min, 25bar Max, Analogue Output
Tehnilised dokumendid
Spetsifikatsioonid:
Minimum Pressure Reading
0bar
Maximum Pressure Reading
25bar
Accuracy
±0.1 %
Output Type
Analogue
Media Measured
Air, Corrosive Fluid, Fresh Water, Hydraulic Oil, Sea Water
Analogue Output
4 → 20 mA
Electrical Connection
M12 3-Pin Connector
Response Time
2 ms
Maximum Current
20 mA
Supply Voltage
12 V dc, 24 V dc
Housing Material
Aluminium Oxide Ceramic, Stainless Steel
Minimum Operating Temperature
-15°C
Mounting Type
Thread Mount
Maximum Operating Temperature
+85°C
IP Rating
IP66, IP67
Päritoluriik
Switzerland
Toote üksikasjad
OsiSense XMLG Electronic Pressure Sensors
Schneider Electric XMLG pressure transmitters and pressure switches feature a ceramic pressure measuring cell. The deformation caused by the pressure is transmitted to the resistors of a Wheatstone bridge silk-screened on the ceramic. The change in resistance is then processed by the integrated electronics, providing either a digital or analog output signal.
€ 245,41
€ 245,41 tk (ilma käibemaksuta)
€ 299,40
€ 299,40 tk (koos käibemaksuga)
1
€ 245,41
€ 245,41 tk (ilma käibemaksuta)
€ 299,40
€ 299,40 tk (koos käibemaksuga)
1
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
Tehnilised dokumendid
Spetsifikatsioonid:
Minimum Pressure Reading
0bar
Maximum Pressure Reading
25bar
Accuracy
±0.1 %
Output Type
Analogue
Media Measured
Air, Corrosive Fluid, Fresh Water, Hydraulic Oil, Sea Water
Analogue Output
4 → 20 mA
Electrical Connection
M12 3-Pin Connector
Response Time
2 ms
Maximum Current
20 mA
Supply Voltage
12 V dc, 24 V dc
Housing Material
Aluminium Oxide Ceramic, Stainless Steel
Minimum Operating Temperature
-15°C
Mounting Type
Thread Mount
Maximum Operating Temperature
+85°C
IP Rating
IP66, IP67
Päritoluriik
Switzerland
Toote üksikasjad
OsiSense XMLG Electronic Pressure Sensors
Schneider Electric XMLG pressure transmitters and pressure switches feature a ceramic pressure measuring cell. The deformation caused by the pressure is transmitted to the resistors of a Wheatstone bridge silk-screened on the ceramic. The change in resistance is then processed by the integrated electronics, providing either a digital or analog output signal.