HARTING, D-Sub Standard Series, Male Crimp D-sub Connector Contact, PdNi Pin, 24 → 20 AWG
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
HartingGender
Male
Contact Material
Brass
Wire Size
24 → 20 AWG
Termination Method
Crimp
Contact Plating
PdNi
Contact Type
Pin
Maximum Contact Resistance
≤10MΩ
Minimum Wire Size mm²
0.25mm²
Maximum Wire Size mm²
0.56mm²
Series
D-Sub Standard
Current Rating
6.5A
Length
14.48mm
Maximum Wire Size AWG
20AWG
Minimum Wire Size AWG
24AWG
Päritoluriik
Germany
Toote üksikasjad
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Standards
IEC 60 807
€ 94,50
€ 0,189 tk (rullis 500) (ilma käibemaksuta)
€ 117,18
€ 0,234 tk (rullis 500) (koos käibemaksuga)
500
€ 94,50
€ 0,189 tk (rullis 500) (ilma käibemaksuta)
€ 117,18
€ 0,234 tk (rullis 500) (koos käibemaksuga)
Lao andmed ajutiselt ei ole saadaval.
500
Lao andmed ajutiselt ei ole saadaval.
| kogus | Ühikuhind | Per Rull |
|---|---|---|
| 500 - 1000 | € 0,189 | € 94,50 |
| 1500 - 2500 | € 0,173 | € 86,50 |
| 3000 - 4500 | € 0,168 | € 84,00 |
| 5000+ | € 0,163 | € 81,50 |
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
HartingGender
Male
Contact Material
Brass
Wire Size
24 → 20 AWG
Termination Method
Crimp
Contact Plating
PdNi
Contact Type
Pin
Maximum Contact Resistance
≤10MΩ
Minimum Wire Size mm²
0.25mm²
Maximum Wire Size mm²
0.56mm²
Series
D-Sub Standard
Current Rating
6.5A
Length
14.48mm
Maximum Wire Size AWG
20AWG
Minimum Wire Size AWG
24AWG
Päritoluriik
Germany
Toote üksikasjad
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Standards
IEC 60 807