Honeywell BZV6 Series Plunger Limit Switch, NO/NC, IP66, SPDT, Die Cast Zinc Housing, 600V ac Max, 15A Max
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
HoneywellActuator Type
Plunger
Pole and Throw Configuration
SPDT
Normal State Configuration
NO/NC
IP Rating
IP66
Maximum Current
15A
Housing Material
Die Cast Zinc
Maximum AC Voltage
600V
Maximum DC Voltage
250V
Connection Type
1/2 in NPT
Series
BZV6
Action Type
Snap Action
Length
69.34mm
Minimum Operating Temperature
-32°C
Depth
54.48mm
Width
44.45mm
Maximum Operating Temperature
+71°C
Mounting Orientation
Vertical
Päritoluriik
United States
Toote üksikasjad
BZV6 Medium Duty Limit Switches
The BZV6 limit switch series from Honeywell is designed for use within a medium duty environment. The switches are offered with or without actuator seal boots. Both have a combination insulator/seal cemented inside the bottom enclosure. Lead washers are used to seal the mounting holes on side mount switches. Removal of the bottom enclosure exposes the terminals for easy wiring.
€ 87,50
€ 87,50 tk (ilma käibemaksuta)
€ 106,75
€ 106,75 tk (koos käibemaksuga)
1
€ 87,50
€ 87,50 tk (ilma käibemaksuta)
€ 106,75
€ 106,75 tk (koos käibemaksuga)
1
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
| kogus | Ühikuhind |
|---|---|
| 1 - 4 | € 87,50 |
| 5 - 9 | € 83,00 |
| 10+ | € 78,50 |
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
HoneywellActuator Type
Plunger
Pole and Throw Configuration
SPDT
Normal State Configuration
NO/NC
IP Rating
IP66
Maximum Current
15A
Housing Material
Die Cast Zinc
Maximum AC Voltage
600V
Maximum DC Voltage
250V
Connection Type
1/2 in NPT
Series
BZV6
Action Type
Snap Action
Length
69.34mm
Minimum Operating Temperature
-32°C
Depth
54.48mm
Width
44.45mm
Maximum Operating Temperature
+71°C
Mounting Orientation
Vertical
Päritoluriik
United States
Toote üksikasjad
BZV6 Medium Duty Limit Switches
The BZV6 limit switch series from Honeywell is designed for use within a medium duty environment. The switches are offered with or without actuator seal boots. Both have a combination insulator/seal cemented inside the bottom enclosure. Lead washers are used to seal the mounting holes on side mount switches. Removal of the bottom enclosure exposes the terminals for easy wiring.