Huber+Suhner Straight 50Ω RF Adapter PC3.5 Socket to PC3.5 Socket 33GHz
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
Huber+SuhnerAdapter Type
PC 3.5 Socket to PC 3.5 Socket
Adapter Type A
PC3.5
Adapter Type B
PC3.5
Gender A
Female
Gender B
Female
Impedance
50Ω
Body Orientation
Straight
Operating Frequency
33GHz
Polarity
Normal
Contact Plating
Gold over Enickel
Length
28.36mm
Contact Material
Beryllium Copper, Stainless Steel
Päritoluriik
Switzerland
Toote üksikasjad
Hubner+Suhner Adaptors for QMA interfaces
Hubner+Suhner adaptors are used within measuring applications with QMA interfaces. These versatile adaptors support the calibration with Hubne+Suhner open standard interfaces, incorporating the same electrical length and the same return loss behaviour of all this series of adaptors the swapping method can be utilised.
HUBER+SUHNER QMA
The interface is based on the SMA dimensions, but instead of a threaded coupling mechanism, a new snap-lock mechanism is used.The QMA interface has a very similar performance to the SMA, but in addition it offers an easier, faster and safer coupling operation, resulting in significant time saving during the production of systems. The packaging density of QMA is increased compared to SMA connectors as no torque spanner is required to fasten the coupling nut.
€ 212,00
€ 212,00 tk (ilma käibemaksuta)
€ 262,88
€ 262,88 tk (koos käibemaksuga)
1
€ 212,00
€ 212,00 tk (ilma käibemaksuta)
€ 262,88
€ 262,88 tk (koos käibemaksuga)
1
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
Huber+SuhnerAdapter Type
PC 3.5 Socket to PC 3.5 Socket
Adapter Type A
PC3.5
Adapter Type B
PC3.5
Gender A
Female
Gender B
Female
Impedance
50Ω
Body Orientation
Straight
Operating Frequency
33GHz
Polarity
Normal
Contact Plating
Gold over Enickel
Length
28.36mm
Contact Material
Beryllium Copper, Stainless Steel
Päritoluriik
Switzerland
Toote üksikasjad
Hubner+Suhner Adaptors for QMA interfaces
Hubner+Suhner adaptors are used within measuring applications with QMA interfaces. These versatile adaptors support the calibration with Hubne+Suhner open standard interfaces, incorporating the same electrical length and the same return loss behaviour of all this series of adaptors the swapping method can be utilised.
HUBER+SUHNER QMA
The interface is based on the SMA dimensions, but instead of a threaded coupling mechanism, a new snap-lock mechanism is used.The QMA interface has a very similar performance to the SMA, but in addition it offers an easier, faster and safer coupling operation, resulting in significant time saving during the production of systems. The packaging density of QMA is increased compared to SMA connectors as no torque spanner is required to fasten the coupling nut.