Kübler K 07.20 Counter, 7 Digit
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
KüblerCount Mode
Impulses
Function
Counter
Input Type
Voltage
Connection Type
Solder Pin
Reset Method
No Reset
Number Of Digits
7
Mounting Type
Panel Mount
Output / Interface
Voltage
Count Direction
Up
Digit Height
4 mm
Cutout Size
30 x 13 mm
Minimum Operating Temperature
-10°C
Minimum Measurement
0
Cutout Height
15mm
Series
K 07.20
Cutout Width
35mm
Depth
32.7mm
Measurement Range
0 → 9999999
Meter Type
Electromechanical
Approvals
cULus, RoHS, UL
Maximum Operating Temperature
+60°C
Päritoluriik
Germany
Toote üksikasjad
Type K07 - micro cumulative counter, 7-digit, front panel mounting
PCB, Surface & DIN Rail Mounting
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals.,Count rate of all products is 10Hz.
€ 38,49
€ 38,49 tk (ilma käibemaksuta)
€ 46,96
€ 46,96 tk (koos käibemaksuga)
1
€ 38,49
€ 38,49 tk (ilma käibemaksuta)
€ 46,96
€ 46,96 tk (koos käibemaksuga)
1
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
| kogus | Ühikuhind |
|---|---|
| 1 - 4 | € 38,49 |
| 5 - 9 | € 37,33 |
| 10+ | € 35,79 |
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
KüblerCount Mode
Impulses
Function
Counter
Input Type
Voltage
Connection Type
Solder Pin
Reset Method
No Reset
Number Of Digits
7
Mounting Type
Panel Mount
Output / Interface
Voltage
Count Direction
Up
Digit Height
4 mm
Cutout Size
30 x 13 mm
Minimum Operating Temperature
-10°C
Minimum Measurement
0
Cutout Height
15mm
Series
K 07.20
Cutout Width
35mm
Depth
32.7mm
Measurement Range
0 → 9999999
Meter Type
Electromechanical
Approvals
cULus, RoHS, UL
Maximum Operating Temperature
+60°C
Päritoluriik
Germany
Toote üksikasjad
Type K07 - micro cumulative counter, 7-digit, front panel mounting
PCB, Surface & DIN Rail Mounting
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals.,Count rate of all products is 10Hz.