Tehnilised Dokumendid
Spetsifikatsioonid:
Brand
Nuvotem TalemaProduct Type
Toroidal Transformer
Primary Voltage
230 V ac
Secondary Voltage
2 x 18 V ac
Number of Outputs
2
Secondary Current
1.25A
Weight
0.3kg
Power
15VA
Diameter
60mm
Minimum Operating Frequency
50Hz
Maximum Operating Frequency
60Hz
Minimum Operating Temperature
0°C
Maximum Operating Temperature
180°C
Termination Type
Copper Conductor Termination Wire
Height
31mm
Standards/Approvals
UL5, UL506, VDE0550, EN60065, BS415, EN61558
Toote üksikasjad
High-quality open style toroidal transformers with a single 230 Vac 50/60 Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.
UL 506; EN 61558
UL 506; EN 61558
Full mounting kit
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.
Lao andmed ajutiselt ei ole saadaval.
€ 53,50
€ 53,50 tk (ilma käibemaksuta)
€ 66,34
€ 66,34 tk (koos käibemaksuga)
1
€ 53,50
€ 53,50 tk (ilma käibemaksuta)
€ 66,34
€ 66,34 tk (koos käibemaksuga)
Lao andmed ajutiselt ei ole saadaval.
1
| kogus | Ühikuhind |
|---|---|
| 1 - 9 | € 53,50 |
| 10 - 24 | € 50,50 |
| 25 - 49 | € 45,10 |
| 50 - 74 | € 39,80 |
| 75+ | € 34,50 |
Tehnilised Dokumendid
Spetsifikatsioonid:
Brand
Nuvotem TalemaProduct Type
Toroidal Transformer
Primary Voltage
230 V ac
Secondary Voltage
2 x 18 V ac
Number of Outputs
2
Secondary Current
1.25A
Weight
0.3kg
Power
15VA
Diameter
60mm
Minimum Operating Frequency
50Hz
Maximum Operating Frequency
60Hz
Minimum Operating Temperature
0°C
Maximum Operating Temperature
180°C
Termination Type
Copper Conductor Termination Wire
Height
31mm
Standards/Approvals
UL5, UL506, VDE0550, EN60065, BS415, EN61558
Toote üksikasjad
High-quality open style toroidal transformers with a single 230 Vac 50/60 Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.
UL 506; EN 61558
UL 506; EN 61558
Full mounting kit
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.