Phoenix Contact ATP-ST 6 Series Partition Plate for Use with DIN Rail Terminal Blocks
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
Phoenix ContactAccessory Type
Partition Plate
Series
ATP-ST 6
For Use With
DIN Rail Terminal Blocks
Päritoluriik
Germany
Toote üksikasjad
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².
€ 3,34
€ 0,669 tk (pakis 5) (ilma käibemaksuta)
€ 4,08
€ 0,816 tk (pakis 5) (koos käibemaksuga)
5
€ 3,34
€ 0,669 tk (pakis 5) (ilma käibemaksuta)
€ 4,08
€ 0,816 tk (pakis 5) (koos käibemaksuga)
5
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
Phoenix ContactAccessory Type
Partition Plate
Series
ATP-ST 6
For Use With
DIN Rail Terminal Blocks
Päritoluriik
Germany
Toote üksikasjad
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².