RS PRO Self-Adhesive Thermal Interface Sheet, 0.06mm Thick, 4W/m·K, 150 x 150mm
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
RS ProDimensions
150 x 150mm
Thickness
0.06mm
Length
150mm
Width
150mm
Thermal Conductivity
4W/m·K
Self-Adhesive
Yes
Minimum Operating Temperature
-45°C
Maximum Operating Temperature
+125°C
Colour
Grey
Operating Temperature Range
-45 → +125 °C
Päritoluriik
Taiwan, Province Of China
Toote üksikasjad
RS PRO Phase Change Interface Material
RS PRO phase change materials are ideal for thermal management applications. Available in this range are phase change interface materials in sheets, resistor pads and as a dispensable paste.
Phase change materials work because they change their state with changes in temperature between the heat source and the heatsink. During this process, the material stores thermal energy which is then released as the material cools. This means that the material can absorb thermal energy as the heat is generated which helps to keep the desired component cool. This improves contact between the surfaces, completely fillling air gaps and increasing heat transfer.
€ 29,90
€ 29,90 tk (ilma käibemaksuta)
€ 36,48
€ 36,48 tk (koos käibemaksuga)
1
€ 29,90
€ 29,90 tk (ilma käibemaksuta)
€ 36,48
€ 36,48 tk (koos käibemaksuga)
1
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
| kogus | Ühikuhind |
|---|---|
| 1 - 9 | € 29,90 |
| 10 - 24 | € 27,30 |
| 25 - 49 | € 26,10 |
| 50+ | € 25,20 |
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
RS ProDimensions
150 x 150mm
Thickness
0.06mm
Length
150mm
Width
150mm
Thermal Conductivity
4W/m·K
Self-Adhesive
Yes
Minimum Operating Temperature
-45°C
Maximum Operating Temperature
+125°C
Colour
Grey
Operating Temperature Range
-45 → +125 °C
Päritoluriik
Taiwan, Province Of China
Toote üksikasjad
RS PRO Phase Change Interface Material
RS PRO phase change materials are ideal for thermal management applications. Available in this range are phase change interface materials in sheets, resistor pads and as a dispensable paste.
Phase change materials work because they change their state with changes in temperature between the heat source and the heatsink. During this process, the material stores thermal energy which is then released as the material cools. This means that the material can absorb thermal energy as the heat is generated which helps to keep the desired component cool. This improves contact between the surfaces, completely fillling air gaps and increasing heat transfer.