Tehnilised dokumendid
Spetsifikatsioonid:
Brand
STMicroelectronicsMotor Type
Brushed DC
Output Configuration
Dual Full Bridge
Maximum IGBT Collector Current
2.8A
Maximum Collector Emitter Voltage
52 V
Mounting Type
Surface Mount
Package Type
PowerSO
Pin Count
20
Maximum Operating Supply Voltage
52 V
Minimum Operating Supply Voltage
8 V
Typical Switching Frequency
100kHz
Minimum Operating Temperature
-25 °C
Dimensions
16 x 11.1 x 3.3mm
Maximum Operating Temperature
+125 °C
Length
16mm
Height
3.3mm
Width
11.1mm
Päritoluriik
Malaysia
Toote üksikasjad
Motor Control Power Drivers, STMicroelectronics
The range of power drivers by STMicroelectronics are designed to drive a motor or a complex load through the logic commands at its input. They can be used with microcontrollers, DSPs or FPGAs in a motor or motion control system. The power drivers come in Dual Full Bridge, Full Bridge and 3 phase.
Motor Controllers & Drivers, STMicroelectronics
€ 5,80
€ 5,80 tk (ilma käibemaksuta)
€ 7,19
€ 7,19 tk (koos käibemaksuga)
Standard
1
€ 5,80
€ 5,80 tk (ilma käibemaksuta)
€ 7,19
€ 7,19 tk (koos käibemaksuga)
Standard
1
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
kogus | Ühikuhind |
---|---|
1 - 9 | € 5,80 |
10 - 49 | € 4,75 |
50 - 99 | € 4,35 |
100 - 199 | € 4,05 |
200+ | € 3,75 |
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
STMicroelectronicsMotor Type
Brushed DC
Output Configuration
Dual Full Bridge
Maximum IGBT Collector Current
2.8A
Maximum Collector Emitter Voltage
52 V
Mounting Type
Surface Mount
Package Type
PowerSO
Pin Count
20
Maximum Operating Supply Voltage
52 V
Minimum Operating Supply Voltage
8 V
Typical Switching Frequency
100kHz
Minimum Operating Temperature
-25 °C
Dimensions
16 x 11.1 x 3.3mm
Maximum Operating Temperature
+125 °C
Length
16mm
Height
3.3mm
Width
11.1mm
Päritoluriik
Malaysia
Toote üksikasjad
Motor Control Power Drivers, STMicroelectronics
The range of power drivers by STMicroelectronics are designed to drive a motor or a complex load through the logic commands at its input. They can be used with microcontrollers, DSPs or FPGAs in a motor or motion control system. The power drivers come in Dual Full Bridge, Full Bridge and 3 phase.