Seeit PRESTO, Universal Programmer for AT, CC Series Microcontrollers, Memory Devices, MSP, PIC
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
SeeitAccessory Type
Universal Programmer
For Use With
AT, CC Series Microcontrollers, Memory Devices, MSP, PIC
Interface
JTAG, Serial-SPI
Programmer Name
PRESTO
Memory Type Programmed
EEPROM, FLASH
Päritoluriik
France
Toote üksikasjad
Seeit PRESTO Programmer
The Seeit PRESTO is a universal SPI programmer which enables quick and easy programming of a range of different microcontrollers (MCUs). The PRESTO module is compatible with Microchip PIC MCUs, AVR ATMEL MCUs and serial EEPROMs. A full list of compatible MCU devices can be found on the datasheet.
The Seeit PRESTO connects to your PC via USB and connects directly to the MCU device with the attached 7 wires. The PRESTO module connects to devices soldered on the PCB with special packages, without having to add any adapters. You do not require an external power supply either as the PRESTO is powered via your PC.
The “GO” button on the front of the PRESTO allows you to start programming quickly. The LEDs on the programmer indicate status, so you don’t require a PC, keyboard or mouse, if you wish.
PC Based Programmers
€ 329,00
€ 329,00 tk (ilma käibemaksuta)
€ 401,38
€ 401,38 tk (koos käibemaksuga)
1
€ 329,00
€ 329,00 tk (ilma käibemaksuta)
€ 401,38
€ 401,38 tk (koos käibemaksuga)
1
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
SeeitAccessory Type
Universal Programmer
For Use With
AT, CC Series Microcontrollers, Memory Devices, MSP, PIC
Interface
JTAG, Serial-SPI
Programmer Name
PRESTO
Memory Type Programmed
EEPROM, FLASH
Päritoluriik
France
Toote üksikasjad
Seeit PRESTO Programmer
The Seeit PRESTO is a universal SPI programmer which enables quick and easy programming of a range of different microcontrollers (MCUs). The PRESTO module is compatible with Microchip PIC MCUs, AVR ATMEL MCUs and serial EEPROMs. A full list of compatible MCU devices can be found on the datasheet.
The Seeit PRESTO connects to your PC via USB and connects directly to the MCU device with the attached 7 wires. The PRESTO module connects to devices soldered on the PCB with special packages, without having to add any adapters. You do not require an external power supply either as the PRESTO is powered via your PC.
The “GO” button on the front of the PRESTO allows you to start programming quickly. The LEDs on the programmer indicate status, so you don’t require a PC, keyboard or mouse, if you wish.