4D Systems, 1.7in Arduino Compatible Display with OLED Display

RS tootekood: 171-1828Bränd: 4D SystemsTootja Part nr.: UOLED-160G2-AR
brand-logo

Tehnilised dokumendid

Spetsifikatsioonid:

Diagonal Display Size

1.7in

Display Technology

OLED Display

Display Resolution

160 x 128pixel

Viewing Area Dimensions

33.6 x 27.0mm

Dimensions

52.0 x 36.0 x 15.5mm

For Use With

Arduino

Toote üksikasjad

4D Systems PMOLED Display Modules with GOLDELOX Processor for Use with Arduino

The range of passive matrix OLED display modules for Arduino available from 4D Systems provide everything needed by a user to easily interface between an Arduino (using its serial port + one GPIO pin) and the OLED module, eliminating wiring headaches. The user can then quickly begin programming the 4D Systems display module through the Arduino. This display is a secondary display and does not replace the monitor or TV used to program the Arduino itself.

Powered from the Arduino the display module GOLDELOX processor can be programmed and configured using 4D Systems’ Workshop4 IDE software (see datasheet for download instruction). The OLED module is set up to receive a wide range of serial commands from the Arduino, for example, to display shapes, text, images, to play sounds and log data to the microSD card.

4D Systems Passive Matrix OLED Displays

Lao andmed ajutiselt ei ole saadaval.

Palun kontrollige hiljem uuesti.

Lao andmed ajutiselt ei ole saadaval.

€ 91,00

tk (pakis 25) (ilma käibemaksuta)

€ 111,02

tk (pakis 25) (koos käibemaksuga)

4D Systems, 1.7in Arduino Compatible Display with OLED Display

€ 91,00

tk (pakis 25) (ilma käibemaksuta)

€ 111,02

tk (pakis 25) (koos käibemaksuga)

4D Systems, 1.7in Arduino Compatible Display with OLED Display
Lao andmed ajutiselt ei ole saadaval.

Tehnilised dokumendid

Spetsifikatsioonid:

Diagonal Display Size

1.7in

Display Technology

OLED Display

Display Resolution

160 x 128pixel

Viewing Area Dimensions

33.6 x 27.0mm

Dimensions

52.0 x 36.0 x 15.5mm

For Use With

Arduino

Toote üksikasjad

4D Systems PMOLED Display Modules with GOLDELOX Processor for Use with Arduino

The range of passive matrix OLED display modules for Arduino available from 4D Systems provide everything needed by a user to easily interface between an Arduino (using its serial port + one GPIO pin) and the OLED module, eliminating wiring headaches. The user can then quickly begin programming the 4D Systems display module through the Arduino. This display is a secondary display and does not replace the monitor or TV used to program the Arduino itself.

Powered from the Arduino the display module GOLDELOX processor can be programmed and configured using 4D Systems’ Workshop4 IDE software (see datasheet for download instruction). The OLED module is set up to receive a wide range of serial commands from the Arduino, for example, to display shapes, text, images, to play sounds and log data to the microSD card.

4D Systems Passive Matrix OLED Displays