Alps Alpine Incremental Incremental Encoder, 15 ppr, Solid Type, 6mm Shaft
Tehnilised dokumendid
Spetsifikatsioonid:
Encoder Technology
Incremental
Pulses Per Revolution
15
Shaft Diameter
6mm
Shaft Type
Solid
Overall Depth
11.7mm
Overall Width
13.75mm
Overall Height
31.6mm
Brand
Alps AlpineMounting Type
Panel Mount
Supply Voltage
5 V dc
Päritoluriik
Japan
Toote üksikasjad
GSM2 Stepper Motor Drive Board
The GSM2 is a standalone drive board designed to drive a stepper motor in unipolar mode. It is done either with or without forcing resistors connected between motor commons and volts. When using the logic connections, you are able to select full, half or wave mode and direction and speed external clock. The GSM2 drive board allows an enable and disable input for various start/stop control options. The stepper motor used with the board must also have four phases and five, six or eight wires.
Supplied with
User instructions
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
€ 5,30
tk (pakis 5) (ilma käibemaksuta)
€ 6,466
tk (pakis 5) (koos käibemaksuga)
5
€ 5,30
tk (pakis 5) (ilma käibemaksuta)
€ 6,466
tk (pakis 5) (koos käibemaksuga)
5
Osta lahtiselt
| kogus | Ühikuhind | Per Pakend |
|---|---|---|
| 5 - 20 | € 5,30 | € 26,50 |
| 25 - 95 | € 4,65 | € 23,25 |
| 100 - 245 | € 4,05 | € 20,25 |
| 250 - 495 | € 3,80 | € 19,00 |
| 500+ | € 3,60 | € 18,00 |
Tehnilised dokumendid
Spetsifikatsioonid:
Encoder Technology
Incremental
Pulses Per Revolution
15
Shaft Diameter
6mm
Shaft Type
Solid
Overall Depth
11.7mm
Overall Width
13.75mm
Overall Height
31.6mm
Brand
Alps AlpineMounting Type
Panel Mount
Supply Voltage
5 V dc
Päritoluriik
Japan
Toote üksikasjad
GSM2 Stepper Motor Drive Board
The GSM2 is a standalone drive board designed to drive a stepper motor in unipolar mode. It is done either with or without forcing resistors connected between motor commons and volts. When using the logic connections, you are able to select full, half or wave mode and direction and speed external clock. The GSM2 drive board allows an enable and disable input for various start/stop control options. The stepper motor used with the board must also have four phases and five, six or eight wires.
Supplied with
User instructions