Carlo Gavazzi Current Monitoring Relay, 1 Phase, SPDT, Maximum of 4 V ac, 150 mV ac/dc, Plug In
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
Carlo GavazziMonitoring Application
Current
Electrical Phase
1
Voltage Sensing Range
Maximum of 4 V ac, 150 mV ac/dc
Contact Configuration
SPDT
Mounting Type
Plug In
Current Sensitivity
Overcurrent, Undercurrent
Time Delay
1 s, 6s
Series
PIB02
Minimum Operating Temperature
-20°C
Width
36mm
Maximum Operating Temperature
+60°C
Dimensions
94 x 36 x 80mm
Maximum Voltage Sensed
4 V ac, 150mV ac/dc
Height
80mm
Length
94mm
Operating Temperature Range
+60°C
Päritoluriik
Italy
Toote üksikasjad
Over Voltage - Over Current Monitoring Relay
Monitoring relays from Carlo Gavazzi can also be used as 1-phase or 3- phase over current monitoring relays when connected with MI or MP current transformers.Owing to the built-in latch function, the ON-position of the relay output can be maintained. The red LED indicates the alarm status.
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
€ 152,00
tk (ilma käibemaksuta)
€ 185,44
tk (koos käibemaksuga)
1
€ 152,00
tk (ilma käibemaksuta)
€ 185,44
tk (koos käibemaksuga)
1
Osta lahtiselt
| kogus | Ühikuhind |
|---|---|
| 1 - 2 | € 152,00 |
| 3+ | € 144,00 |
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
Carlo GavazziMonitoring Application
Current
Electrical Phase
1
Voltage Sensing Range
Maximum of 4 V ac, 150 mV ac/dc
Contact Configuration
SPDT
Mounting Type
Plug In
Current Sensitivity
Overcurrent, Undercurrent
Time Delay
1 s, 6s
Series
PIB02
Minimum Operating Temperature
-20°C
Width
36mm
Maximum Operating Temperature
+60°C
Dimensions
94 x 36 x 80mm
Maximum Voltage Sensed
4 V ac, 150mV ac/dc
Height
80mm
Length
94mm
Operating Temperature Range
+60°C
Päritoluriik
Italy
Toote üksikasjad
Over Voltage - Over Current Monitoring Relay
Monitoring relays from Carlo Gavazzi can also be used as 1-phase or 3- phase over current monitoring relays when connected with MI or MP current transformers.Owing to the built-in latch function, the ON-position of the relay output can be maintained. The red LED indicates the alarm status.