Tehnilised dokumendid
Spetsifikatsioonid:
Brand
ITT CannonNumber Of Contacts
15
Mounting Type
Panel Mount
Connector Size
Standard
Plug/Socket
Socket
Contact Gender
Male
Termination Method
Crimp
IP Rating
IP67
Series
Trident Neptune
Body Orientation
Straight
Contact Plating
Nickel
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+105°C
Contact Material
Copper
Toote üksikasjad
Panel Plug and Socket Shells
Panel plugs and sockets feature the same rear sealing arrangement. Again, the retaining ring may be discarded in favour of a backshell if required.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
€ 25,30
€ 25,30 tk (ilma käibemaksuta)
€ 30,87
€ 30,87 tk (koos käibemaksuga)
1
€ 25,30
€ 25,30 tk (ilma käibemaksuta)
€ 30,87
€ 30,87 tk (koos käibemaksuga)
1
Osta lahtiselt
kogus | Ühikuhind |
---|---|
1 - 19 | € 25,30 |
20 - 39 | € 22,90 |
40+ | € 20,20 |
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
ITT CannonNumber Of Contacts
15
Mounting Type
Panel Mount
Connector Size
Standard
Plug/Socket
Socket
Contact Gender
Male
Termination Method
Crimp
IP Rating
IP67
Series
Trident Neptune
Body Orientation
Straight
Contact Plating
Nickel
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+105°C
Contact Material
Copper
Toote üksikasjad
Panel Plug and Socket Shells
Panel plugs and sockets feature the same rear sealing arrangement. Again, the retaining ring may be discarded in favour of a backshell if required.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.