Nuvotem Talema 230V ac, 2 x 12V ac Toroidal Transformer, 30VA 2 Output
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
Nuvotem TalemaPrimary Voltage Rating
230V ac
Secondary Voltage Rating
2 x 12V ac
Power Rating
30VA
Number of Outputs
2
Secondary Current
1.25A
Height
32mm
Weight
450g
Diameter
70mm
Dimensions
70 (Dia.) x 32mm
Maximum Operating Frequency
450Hz
Termination Type
Copper Conductor Termination Wire
Maximum Temperature
+120°C
Minimum Temperature
0°C
Isolation Voltage
4.5kV ac
Päritoluriik
India
Toote üksikasjad
Open Style with Leads, 15VA to 1000VA
High-quality open style toroidal transformers with a single 230 Vac 50/60 Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.
Supplied with
Full mounting kit
Warning
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.
Standards
UL 506; EN 61558
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
€ 39,50
tk (ilma käibemaksuta)
€ 48,19
tk (koos käibemaksuga)
1
€ 39,50
tk (ilma käibemaksuta)
€ 48,19
tk (koos käibemaksuga)
1
Osta lahtiselt
| kogus | Ühikuhind |
|---|---|
| 1 - 9 | € 39,50 |
| 10 - 24 | € 37,40 |
| 25 - 49 | € 33,40 |
| 50 - 74 | € 29,50 |
| 75+ | € 25,50 |
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
Nuvotem TalemaPrimary Voltage Rating
230V ac
Secondary Voltage Rating
2 x 12V ac
Power Rating
30VA
Number of Outputs
2
Secondary Current
1.25A
Height
32mm
Weight
450g
Diameter
70mm
Dimensions
70 (Dia.) x 32mm
Maximum Operating Frequency
450Hz
Termination Type
Copper Conductor Termination Wire
Maximum Temperature
+120°C
Minimum Temperature
0°C
Isolation Voltage
4.5kV ac
Päritoluriik
India
Toote üksikasjad
Open Style with Leads, 15VA to 1000VA
High-quality open style toroidal transformers with a single 230 Vac 50/60 Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.
Supplied with
Full mounting kit
Warning
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.
Standards
UL 506; EN 61558