Altera Ethernet Blaster II

RS tootekood: 906-3937Bränd: AlteraTootja Part nr.: PL-ETH2-BLASTER
brand-logo

Tehnilised dokumendid

Spetsifikatsioonid:

Brand

Altera

Kit Classification

Programmer

Kit Name

Ethernet Blaster II

Product Type

Programmer

Toote üksikasjad

EthernetBlaster II In-Circuit Programming Cable, Altera

The Altera EthernetBlaster II connects to a standard Ethernet network port with an RJ-45 connector to communicate with client systems. Multiple developers can access Altera devices simultaneously and download design changes directly to the device, increasing productivity and enabling multiple design iterations in quick succession.

Communicate with client systems using the TCP/IP protocol. Supports both static and dynamic IP addressing. You can also interface directly using a standard CAT 5 UTP 4-pair patch cable.

You can also programme serial configuration devices, including EPCS1, EPCS4, EPCS16, EPCS64, and EPCS128 devices. In addition, the EthernetBlaster II communications cable supports target systems using 3.3-V LVTTL/LVCMOS and single-ended I/O standards from 3.3 V down to 1.2 V.

Supported Devices

Lao andmed ajutiselt ei ole saadaval.

Palun kontrollige hiljem uuesti.

Lao andmed ajutiselt ei ole saadaval.

€ 580,00

tk (ilma käibemaksuta)

€ 707,60

tk (koos käibemaksuga)

Altera Ethernet Blaster II

€ 580,00

tk (ilma käibemaksuta)

€ 707,60

tk (koos käibemaksuga)

Altera Ethernet Blaster II
Lao andmed ajutiselt ei ole saadaval.

Tehnilised dokumendid

Spetsifikatsioonid:

Brand

Altera

Kit Classification

Programmer

Kit Name

Ethernet Blaster II

Product Type

Programmer

Toote üksikasjad

EthernetBlaster II In-Circuit Programming Cable, Altera

The Altera EthernetBlaster II connects to a standard Ethernet network port with an RJ-45 connector to communicate with client systems. Multiple developers can access Altera devices simultaneously and download design changes directly to the device, increasing productivity and enabling multiple design iterations in quick succession.

Communicate with client systems using the TCP/IP protocol. Supports both static and dynamic IP addressing. You can also interface directly using a standard CAT 5 UTP 4-pair patch cable.

You can also programme serial configuration devices, including EPCS1, EPCS4, EPCS16, EPCS64, and EPCS128 devices. In addition, the EthernetBlaster II communications cable supports target systems using 3.3-V LVTTL/LVCMOS and single-ended I/O standards from 3.3 V down to 1.2 V.

Supported Devices