Bartec ComEx Series Illuminated Push Button, Panel Mount, 30.5mm Cutout, SPST, IP67
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
BartecIlluminated
Yes
Panel Cut Out Diameter
30.5mm
Mounting Type
Panel Mount
Contact Configuration
SPST
IP Rating
IP67
Series
ComEx
Manufacturer Part No.
07-3363-3823/2000
Terminal Type
Wire Lead
Maximum AC Voltage
230V
Maximum DC Voltage
24V
Minimum Operating Temperature
-40°C
Hazardous Area Certification
ATEX
Maximum Operating Temperature
+50°C
Päritoluriik
Germany
Toote üksikasjad
Illuminated Mounting Pushbutton
Illuminated pushbuttons in a range of colours, either N/O or N/C, for floor mounting on TS 35 x 7.5 DIN rail.
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
P.O.A.
1
P.O.A.
1
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
BartecIlluminated
Yes
Panel Cut Out Diameter
30.5mm
Mounting Type
Panel Mount
Contact Configuration
SPST
IP Rating
IP67
Series
ComEx
Manufacturer Part No.
07-3363-3823/2000
Terminal Type
Wire Lead
Maximum AC Voltage
230V
Maximum DC Voltage
24V
Minimum Operating Temperature
-40°C
Hazardous Area Certification
ATEX
Maximum Operating Temperature
+50°C
Päritoluriik
Germany
Toote üksikasjad
Illuminated Mounting Pushbutton
Illuminated pushbuttons in a range of colours, either N/O or N/C, for floor mounting on TS 35 x 7.5 DIN rail.
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.