ACPL-782T-300E Broadcom, Isolation Amplifier, 4.5 To 5.5 V, 8-Pin DIP8 - Gull Wing
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
BroadcomPower Supply Type
Single
Typical Dual Supply Voltage
4.5 To 5.5V
Typical Single Supply Voltage
4.5 to 5.5 V
Isolation Mode Rejection
76dB
Rail to Rail
Rail to Rail Output
Number of Channels per Chip
1
Mounting Type
Surface Mount
Package Type
DIP8 - Gull Wing
Pin Count
8
Height
4.7mm
Width
6.35mm
Length
9.8mm
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
125 °C
Toote üksikasjad
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
€ 9,70
tk (torus 50) (ilma käibemaksuta)
€ 11,834
tk (torus 50) (koos käibemaksuga)
50
€ 9,70
tk (torus 50) (ilma käibemaksuta)
€ 11,834
tk (torus 50) (koos käibemaksuga)
50
Osta lahtiselt
| kogus | Ühikuhind | Per Tuub |
|---|---|---|
| 50 - 50 | € 9,70 | € 485,00 |
| 100 - 100 | € 8,70 | € 435,00 |
| 150 - 150 | € 7,70 | € 385,00 |
| 200+ | € 7,20 | € 360,00 |
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
BroadcomPower Supply Type
Single
Typical Dual Supply Voltage
4.5 To 5.5V
Typical Single Supply Voltage
4.5 to 5.5 V
Isolation Mode Rejection
76dB
Rail to Rail
Rail to Rail Output
Number of Channels per Chip
1
Mounting Type
Surface Mount
Package Type
DIP8 - Gull Wing
Pin Count
8
Height
4.7mm
Width
6.35mm
Length
9.8mm
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
125 °C
Toote üksikasjad
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products