Crompton Controls 3 Phase Brake Module, 11 kW, 415 V ac

RS tootekood: 447-7432Bränd: Crompton ControlsTootja Part nr.: 3DC3ENS
brand-logo
View all in Pidurimoodulid

Tehnilised dokumendid

Spetsifikatsioonid:

Phase

3

Starter Included

Yes

Power Rating

11 kW

Supply Voltage

415 V ac

Injection Time

0.5 → 25 s

Enclosure Size

305 x 285 x 159mm

IP Rating

IP55

Enclosure Length

305mm

Enclosure Width

285mm

Enclosure Depth

159mm

Päritoluriik

United Kingdom

Toote üksikasjad

Crompton Modules

DC Brake Modules

A powerbrake unit is used where fast, efficient and predictable stopping of a machine in the shortest possible time is required. Using the d.c. injection method, it provides a controlled deceleration to a stop, by injecting a d.c. current into two of the motor terminals and neutralising the rotating magnetic field in the motor after the 3 phase supply has been disconnected. This stops the motor coasting to a halt and reduces the delay time by this enforced braking. They can be used with a standard 3 phase induction motor. The unit may be located on a piece of machinery or adjacent to it, with little disruption or modification required to the existing wiring. The Powerbrake units provide a simple cost-effective solution to motor braking, which is maintenance and wear-free.,Brake Module - For a brake unit, all the control wiring has to be supplied and installed by the customer, including interlocked contactors and pushbuttons.,Production Brakes - Enclosed brakes with all control wiring included, optional DOL starter built in Injects DC on EVERY stop.,Critical Brake - Enclosed brake with contactors built in. Must be used with existing starter, also AC must pass through the unit so that it can be isolated before DC is injected. Only injects DC when E-stop activated.

Lao andmed ajutiselt ei ole saadaval.

Palun kontrollige hiljem uuesti.

Lao andmed ajutiselt ei ole saadaval.

€ 886,08

tk (ilma käibemaksuta)

€ 1 081,02

tk (koos käibemaksuga)

Crompton Controls 3 Phase Brake Module, 11 kW, 415 V ac

€ 886,08

tk (ilma käibemaksuta)

€ 1 081,02

tk (koos käibemaksuga)

Crompton Controls 3 Phase Brake Module, 11 kW, 415 V ac
Lao andmed ajutiselt ei ole saadaval.

Tehnilised dokumendid

Spetsifikatsioonid:

Phase

3

Starter Included

Yes

Power Rating

11 kW

Supply Voltage

415 V ac

Injection Time

0.5 → 25 s

Enclosure Size

305 x 285 x 159mm

IP Rating

IP55

Enclosure Length

305mm

Enclosure Width

285mm

Enclosure Depth

159mm

Päritoluriik

United Kingdom

Toote üksikasjad

Crompton Modules

DC Brake Modules

A powerbrake unit is used where fast, efficient and predictable stopping of a machine in the shortest possible time is required. Using the d.c. injection method, it provides a controlled deceleration to a stop, by injecting a d.c. current into two of the motor terminals and neutralising the rotating magnetic field in the motor after the 3 phase supply has been disconnected. This stops the motor coasting to a halt and reduces the delay time by this enforced braking. They can be used with a standard 3 phase induction motor. The unit may be located on a piece of machinery or adjacent to it, with little disruption or modification required to the existing wiring. The Powerbrake units provide a simple cost-effective solution to motor braking, which is maintenance and wear-free.,Brake Module - For a brake unit, all the control wiring has to be supplied and installed by the customer, including interlocked contactors and pushbuttons.,Production Brakes - Enclosed brakes with all control wiring included, optional DOL starter built in Injects DC on EVERY stop.,Critical Brake - Enclosed brake with contactors built in. Must be used with existing starter, also AC must pass through the unit so that it can be isolated before DC is injected. Only injects DC when E-stop activated.