Crouzet Phase Monitoring Relay, 3 Phase, SP-NO/NC, DIN Rail
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
CrouzetMonitoring Application
Phase
Electrical Phase
3
Contact Configuration
SP-NO/NC
Mounting Type
DIN Rail
Phase Sensitivity
Phase Failure, Phase Imbalance, Phase Sequence
Time Delay
0.1 → 10s
Series
MWA
Minimum Operating Temperature
-20°C
Width
17.5mm
Maximum Operating Temperature
+50°C
Dimensions
69 x 17.5 x 92.6mm
Height
92.6mm
Length
69mm
Operating Temperature Range
+50°C
Toote üksikasjad
Multi Function Phase Control Relays 17.5mm - C-Lynx
3 phase network control relays monitor: the correct sequence of phases L1, L2, L3, the total phase failure - Undervoltage and overvoltage from 2% to 20% of Under Voltage Relay and Asymmetry rate from 5% to 15% of Under Voltage Relay. LEDs are used for fault signalling, if a fault persists for longer than the threshold crossing delay configured by the operator, the output relay opens and the LED R is extinguished.
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
€ 141,00
tk (ilma käibemaksuta)
€ 172,02
tk (koos käibemaksuga)
1
€ 141,00
tk (ilma käibemaksuta)
€ 172,02
tk (koos käibemaksuga)
1
Osta lahtiselt
| kogus | Ühikuhind |
|---|---|
| 1 - 4 | € 141,00 |
| 5 - 9 | € 132,00 |
| 10 - 24 | € 125,00 |
| 25 - 49 | € 118,00 |
| 50+ | € 111,00 |
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
CrouzetMonitoring Application
Phase
Electrical Phase
3
Contact Configuration
SP-NO/NC
Mounting Type
DIN Rail
Phase Sensitivity
Phase Failure, Phase Imbalance, Phase Sequence
Time Delay
0.1 → 10s
Series
MWA
Minimum Operating Temperature
-20°C
Width
17.5mm
Maximum Operating Temperature
+50°C
Dimensions
69 x 17.5 x 92.6mm
Height
92.6mm
Length
69mm
Operating Temperature Range
+50°C
Toote üksikasjad
Multi Function Phase Control Relays 17.5mm - C-Lynx
3 phase network control relays monitor: the correct sequence of phases L1, L2, L3, the total phase failure - Undervoltage and overvoltage from 2% to 20% of Under Voltage Relay and Asymmetry rate from 5% to 15% of Under Voltage Relay. LEDs are used for fault signalling, if a fault persists for longer than the threshold crossing delay configured by the operator, the output relay opens and the LED R is extinguished.