Festo Pneumatic Guided Cylinder - 170829, 12mm Bore, 50mm Stroke, DFM Series, Double Acting
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
FestoStroke
50mm
Bore
12mm
Manufacturer Series
DFM
Action
Double
Maximum Operating Pressure
10 bar
Cushioning Type
Elastic
Model Number p
170829
Model Number (p)
170829
Dimensions
105 x 60 x 28mm
Weight
544g
Maximum Operating Temperature
+80°C
Length
105mm
Absolute Maximum Pressure
1 Mpa
Height
28mm
Minimum Operating Temperature
-20°C
Width
60mm
Päritoluriik
Germany
Toote üksikasjad
DFM Pneumatic Guided Cylinders - Slide Bearing
Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Four plain slide bearings on the large diameter guide rods provide high rigidity suitable for high loads. Designed for high load pneumatic applications such as clamping, stopping, material handling and lifting. The sturdy and precise aluminium construction is maintenance free and highly resistant to torque and lateral external forces. A compact design incorporates the piston rod as part of the guide body.
The DFM series of guided actuators have flexible cushioning plates to reduce noise during operation and increase service life. Integrated slots on the actuator body allow for incorporating proximity sensors to measure the linear motion of the piston. Air supply ports on both the top and side of the cylinder provide flexible positioning options.
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
€ 295,00
tk (ilma käibemaksuta)
€ 359,90
tk (koos käibemaksuga)
1
€ 295,00
tk (ilma käibemaksuta)
€ 359,90
tk (koos käibemaksuga)
1
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
FestoStroke
50mm
Bore
12mm
Manufacturer Series
DFM
Action
Double
Maximum Operating Pressure
10 bar
Cushioning Type
Elastic
Model Number p
170829
Model Number (p)
170829
Dimensions
105 x 60 x 28mm
Weight
544g
Maximum Operating Temperature
+80°C
Length
105mm
Absolute Maximum Pressure
1 Mpa
Height
28mm
Minimum Operating Temperature
-20°C
Width
60mm
Päritoluriik
Germany
Toote üksikasjad
DFM Pneumatic Guided Cylinders - Slide Bearing
Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Four plain slide bearings on the large diameter guide rods provide high rigidity suitable for high loads. Designed for high load pneumatic applications such as clamping, stopping, material handling and lifting. The sturdy and precise aluminium construction is maintenance free and highly resistant to torque and lateral external forces. A compact design incorporates the piston rod as part of the guide body.
The DFM series of guided actuators have flexible cushioning plates to reduce noise during operation and increase service life. Integrated slots on the actuator body allow for incorporating proximity sensors to measure the linear motion of the piston. Air supply ports on both the top and side of the cylinder provide flexible positioning options.