HARTING, D-Sub Standard Series, Male Crimp D-Sub Connector Contact, Gold over Nickel Pin 24 AWG
Technical Document
Specifications
Brand
HartingGender
Male
Product Type
D-Sub Connector Contact
Contact Material
Brass
Contact Plating
Gold over Nickel
Maximum Contact Resistance
10mΩ
Contact Type
Pin
Minimum Wire Size mm²
0.09mm²
Maximum Wire Size mm²
0.24mm²
Series
D-Sub Standard
Length
14.48mm
Termination Type
Crimp
Standards/Approvals
No
Minimum Wire Size AWG
24AWG
Maximum Wire Size AWG
24AWG
Product details
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Appropriate tooling for Harting D-sub crimps includes the following:
• Stock number 740-6657 is an Insertion and Extraction Tool
• Stock number 100-8566 is a Manual Crimp Tool
Standards
IEC 60 807
Stock information temporarily unavailable.
€ 93.50
€ 0.187 Each (On a Reel of 500) (Exc. Vat)
€ 115.94
€ 0.232 Each (On a Reel of 500) (inc. VAT)
500
€ 93.50
€ 0.187 Each (On a Reel of 500) (Exc. Vat)
€ 115.94
€ 0.232 Each (On a Reel of 500) (inc. VAT)
Stock information temporarily unavailable.
500
Technical Document
Specifications
Brand
HartingGender
Male
Product Type
D-Sub Connector Contact
Contact Material
Brass
Contact Plating
Gold over Nickel
Maximum Contact Resistance
10mΩ
Contact Type
Pin
Minimum Wire Size mm²
0.09mm²
Maximum Wire Size mm²
0.24mm²
Series
D-Sub Standard
Length
14.48mm
Termination Type
Crimp
Standards/Approvals
No
Minimum Wire Size AWG
24AWG
Maximum Wire Size AWG
24AWG
Product details
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Appropriate tooling for Harting D-sub crimps includes the following:
• Stock number 740-6657 is an Insertion and Extraction Tool
• Stock number 100-8566 is a Manual Crimp Tool
Standards
IEC 60 807