Harting, D-Sub Standard Series, Male Crimp D-sub Connector Contact, PdNi Pin, 24 → 20 AWG
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
HartingGender
Male
Wire Size
24 → 20 AWG
Contact Material
Brass
Contact Plating
PdNi
Termination Method
Crimp
Maximum Contact Resistance
≤10MΩ
Contact Type
Pin
Minimum Wire Size mm²
0.25mm²
Maximum Wire Size mm²
0.56mm²
Series
D-Sub Standard
Current Rating
6.5A
Length
14.48mm
Minimum Wire Size AWG
24AWG
Maximum Wire Size AWG
20AWG
Päritoluriik
Germany
Toote üksikasjad
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Standards
IEC 60 807
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
€ 0,201
tk (rullis 500) (ilma käibemaksuta)
€ 0,245
tk (rullis 500) (koos käibemaksuga)
500
€ 0,201
tk (rullis 500) (ilma käibemaksuta)
€ 0,245
tk (rullis 500) (koos käibemaksuga)
500
Osta lahtiselt
| kogus | Ühikuhind | Per Rull |
|---|---|---|
| 500 - 1000 | € 0,201 | € 100,50 |
| 1500 - 2500 | € 0,18 | € 90,00 |
| 3000 - 4500 | € 0,171 | € 85,50 |
| 5000+ | € 0,162 | € 81,00 |
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
HartingGender
Male
Wire Size
24 → 20 AWG
Contact Material
Brass
Contact Plating
PdNi
Termination Method
Crimp
Maximum Contact Resistance
≤10MΩ
Contact Type
Pin
Minimum Wire Size mm²
0.25mm²
Maximum Wire Size mm²
0.56mm²
Series
D-Sub Standard
Current Rating
6.5A
Length
14.48mm
Minimum Wire Size AWG
24AWG
Maximum Wire Size AWG
20AWG
Päritoluriik
Germany
Toote üksikasjad
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Standards
IEC 60 807