HellermannTyton WIC1 Snap On Cable Markers, Yellow, Pre-printed ""0 → 9"", 2 → 2.8mm Cable
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
HellermannTytonAffixing Method
Snap On
Legend
0 → 9
Minimum Cable Diameter
2mm
Maximum Cable Diameter
2.8mm
Colour
Yellow
Length
3mm
Width
5 mm
Quantity
200
Printable
No
Material
Polyamide
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+85°C
Series
WIC1
Cable Diameter Range
2 → 2.8mm
Resistant To
Vibrations
Operating Temperature Range
-40 → +85 °C
Päritoluriik
France
Toote üksikasjad
WIC Snap-on Cable Markers
WIC markers are applied to the wire by simply clicking them on using the WIC tool or if no tool is available they can easily be applied by hand. Simply insert the marker strip into the back of the tool and slide down to the end and simply press the marker down over the wire. Twist off the marker and apply the next marker. Once all the markers are on slide them together until the locking mechanism engages. The markers are on a dispenser that is colour coded (Red, Blue or Yellow) for the different sizes of markers. The applicator tool (which can be used with all 3 sizes of markers) is easy to use and designed for use in confined space.
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
€ 11,40
1 pakk 200 tk (ilma käibemaksuta)
€ 13,91
1 pakk 200 tk (koos käibemaksuga)
1
€ 11,40
1 pakk 200 tk (ilma käibemaksuta)
€ 13,91
1 pakk 200 tk (koos käibemaksuga)
1
Osta lahtiselt
| kogus | Ühikuhind |
|---|---|
| 1 - 14 | € 11,40 |
| 15 - 49 | € 10,80 |
| 50+ | € 10,20 |
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
HellermannTytonAffixing Method
Snap On
Legend
0 → 9
Minimum Cable Diameter
2mm
Maximum Cable Diameter
2.8mm
Colour
Yellow
Length
3mm
Width
5 mm
Quantity
200
Printable
No
Material
Polyamide
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+85°C
Series
WIC1
Cable Diameter Range
2 → 2.8mm
Resistant To
Vibrations
Operating Temperature Range
-40 → +85 °C
Päritoluriik
France
Toote üksikasjad
WIC Snap-on Cable Markers
WIC markers are applied to the wire by simply clicking them on using the WIC tool or if no tool is available they can easily be applied by hand. Simply insert the marker strip into the back of the tool and slide down to the end and simply press the marker down over the wire. Twist off the marker and apply the next marker. Once all the markers are on slide them together until the locking mechanism engages. The markers are on a dispenser that is colour coded (Red, Blue or Yellow) for the different sizes of markers. The applicator tool (which can be used with all 3 sizes of markers) is easy to use and designed for use in confined space.