INA HF1216-L564 Sprag Clutch Bearing 12mm I.D., 18mm O.D., 16mm Race Width
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
INAInside Diameter
12mm
Outside Diameter
18mm
Race Width
16mm
Bore Type
Parallel
Material
Steel
Cage Material
Plastic
Number of Rows
1
End Type
Open
Limiting Speed
11000 (Rotating Shaft) rpm, 8000 (Rotating Outer Ring) rpm
Maximum Speed - Oil
11000 (Rotating Shaft) rpm, 8000 (Rotating Outer Ring) rpm
Maximum Speed - Grease
11000 (Rotating Shaft) rpm, 8000 (Rotating Outer Ring) rpm
Päritoluriik
Germany
Toote üksikasjad
Drawn Cup Roller Clutches
INA from Schaeffler drawn cup roller clutches are one-way clutches comprising thin‑walled, drawn outer rings with a series of ramps on the inside diameter. There are also plastic cages, pressure springs and needle rollers. They can transmit high torques in one direction and are compact in a radial direction.
Drawn cup roller clutches give precise indexing, since the individual spring loading of the needle rollers ensures continuous contact between the shaft, needle rollers and ramps. They allow high indexing frequencies due to their low mass and the resulting low moment of inertia of the clamping elements. They also have a low overrunning frictional torque.
INA
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
€ 17,00
tk (ilma käibemaksuta)
€ 20,74
tk (koos käibemaksuga)
1
€ 17,00
tk (ilma käibemaksuta)
€ 20,74
tk (koos käibemaksuga)
1
Osta lahtiselt
| kogus | Ühikuhind |
|---|---|
| 1 - 4 | € 17,00 |
| 5 - 9 | € 16,30 |
| 10 - 24 | € 15,40 |
| 25+ | € 15,10 |
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
INAInside Diameter
12mm
Outside Diameter
18mm
Race Width
16mm
Bore Type
Parallel
Material
Steel
Cage Material
Plastic
Number of Rows
1
End Type
Open
Limiting Speed
11000 (Rotating Shaft) rpm, 8000 (Rotating Outer Ring) rpm
Maximum Speed - Oil
11000 (Rotating Shaft) rpm, 8000 (Rotating Outer Ring) rpm
Maximum Speed - Grease
11000 (Rotating Shaft) rpm, 8000 (Rotating Outer Ring) rpm
Päritoluriik
Germany
Toote üksikasjad
Drawn Cup Roller Clutches
INA from Schaeffler drawn cup roller clutches are one-way clutches comprising thin‑walled, drawn outer rings with a series of ramps on the inside diameter. There are also plastic cages, pressure springs and needle rollers. They can transmit high torques in one direction and are compact in a radial direction.
Drawn cup roller clutches give precise indexing, since the individual spring loading of the needle rollers ensures continuous contact between the shaft, needle rollers and ramps. They allow high indexing frequencies due to their low mass and the resulting low moment of inertia of the clamping elements. They also have a low overrunning frictional torque.