Tehnilised dokumendid
Spetsifikatsioonid:
Brand
JSTSeries
XA
Pitch
2.5mm
Number Of Contacts
2
Number Of Rows
1
Body Orientation
Right Angle
Shrouded/Unshrouded
Shrouded
Connector System
Wire to Board
Mounting Type
Through Hole
Termination Method
Solder
Contact Plating
Tin
Contact Material
Copper Alloy
Current Rating
3.0A
Voltage Rating
250.0 V
Päritoluriik
Japan
Toote üksikasjad
XA series 90° Shrouded Headers
A range of XA series 2.5mm pitch 90° wire-to-board shrouded PCB header connectors from JST. These side-entry headers have a locking ramp device that provides a secure connection to the mating connector and also helps to prevent disconnection due to vibration or during the assembly process. Insertion guides and polarization bosses are also incorporated into the housing design of these XA series PCB headers to facilitate easy insertion and accurate alignment on the PCB. The connector housings are made from glass filled PA66 nylon which is effective against solder cracking problems.
2.5mm Wire-to-Board Connector, JST XA Series
Please note- the colour of the picture displayed above is for reference only.
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
€ 0,454
tk (pakis 10) (ilma käibemaksuta)
€ 0,554
tk (pakis 10) (koos käibemaksuga)
10
€ 0,454
tk (pakis 10) (ilma käibemaksuta)
€ 0,554
tk (pakis 10) (koos käibemaksuga)
10
Osta lahtiselt
kogus | Ühikuhind | Per Pakend |
---|---|---|
10 - 240 | € 0,454 | € 4,54 |
250 - 990 | € 0,335 | € 3,35 |
1000 - 4990 | € 0,234 | € 2,34 |
5000 - 9990 | € 0,199 | € 1,99 |
10000+ | € 0,188 | € 1,88 |
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
JSTSeries
XA
Pitch
2.5mm
Number Of Contacts
2
Number Of Rows
1
Body Orientation
Right Angle
Shrouded/Unshrouded
Shrouded
Connector System
Wire to Board
Mounting Type
Through Hole
Termination Method
Solder
Contact Plating
Tin
Contact Material
Copper Alloy
Current Rating
3.0A
Voltage Rating
250.0 V
Päritoluriik
Japan
Toote üksikasjad
XA series 90° Shrouded Headers
A range of XA series 2.5mm pitch 90° wire-to-board shrouded PCB header connectors from JST. These side-entry headers have a locking ramp device that provides a secure connection to the mating connector and also helps to prevent disconnection due to vibration or during the assembly process. Insertion guides and polarization bosses are also incorporated into the housing design of these XA series PCB headers to facilitate easy insertion and accurate alignment on the PCB. The connector housings are made from glass filled PA66 nylon which is effective against solder cracking problems.
2.5mm Wire-to-Board Connector, JST XA Series
Please note- the colour of the picture displayed above is for reference only.