MENNEKES IP44 Red Cable Mount 3P + N + E Industrial Power Plug, Rated At 32A, 400 V,With Phase Inverter
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
MennekesCurrent Rating
32A
Plug/Socket
Plug
Pole Format
3P + N + E
Voltage Rating
400 V
Mounting Type
Cable Mount
Gender
Male
Body Orientation
Straight
Termination Method
Screw Terminal
IP Rating
IP44
Colour
Red
Cable CSA
2.5 → 6mm²
Minimum Operating Temperature
-25°C
Maximum Operating Temperature
+55°C
Phase Inverter
Yes
Low Voltage
No
Päritoluriik
Germany
Toote üksikasjad
Phase Inverter Plug
The Phase inverter plug represents a novel solution for the problem of 3-phase rotating equipment turning in the wrong direction. Two of the phase contact pins are mounted on an insulated plate which can be rotated, but which is held by a pressure interlock when inserted into a socket. If the motor rotates in the wrong direction, then the interlock is simply depressed with a screwdriver and the insulated plate is rotated. This takes only seconds and the motor then turns in the correct direction. The switching of wires between terminals, which is time consuming and dangerous for untrained personnel, is no longer necessary.
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
€ 87,00
tk (ilma käibemaksuta)
€ 106,14
tk (koos käibemaksuga)
1
€ 87,00
tk (ilma käibemaksuta)
€ 106,14
tk (koos käibemaksuga)
1
Osta lahtiselt
| kogus | Ühikuhind |
|---|---|
| 1 - 4 | € 87,00 |
| 5+ | € 83,00 |
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
MennekesCurrent Rating
32A
Plug/Socket
Plug
Pole Format
3P + N + E
Voltage Rating
400 V
Mounting Type
Cable Mount
Gender
Male
Body Orientation
Straight
Termination Method
Screw Terminal
IP Rating
IP44
Colour
Red
Cable CSA
2.5 → 6mm²
Minimum Operating Temperature
-25°C
Maximum Operating Temperature
+55°C
Phase Inverter
Yes
Low Voltage
No
Päritoluriik
Germany
Toote üksikasjad
Phase Inverter Plug
The Phase inverter plug represents a novel solution for the problem of 3-phase rotating equipment turning in the wrong direction. Two of the phase contact pins are mounted on an insulated plate which can be rotated, but which is held by a pressure interlock when inserted into a socket. If the motor rotates in the wrong direction, then the interlock is simply depressed with a screwdriver and the insulated plate is rotated. This takes only seconds and the motor then turns in the correct direction. The switching of wires between terminals, which is time consuming and dangerous for untrained personnel, is no longer necessary.