Murata MGK Non-Isolated DC-DC Converter, 1.8V dc/ 20A Output, 8 → 14 V dc Input, 36W, Surface Mount, +85°C Max
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
MurataOutput Voltage
1.8V dc
Input Voltage Range
8 → 14 V dc
Power Rating
36W
Input Voltage Nominal
12 V dc
Output Current
20A
Mounting Type
Surface Mount
Number of Outputs
1
Width
9mm
Depth
5.6mm
Length
10.5mm
Series
MGK
Load Regulation
±1%
Minimum Temperature
-40°C
Efficiency
87.8%
Maximum Temperature
+85°C
Standards Met
CSA-C22.2 No. 60950-1, EN 60950, IEC, IEC/EN 60950-1, UL, UL 60950-1
Toote üksikasjad
Murata Mono Block 20A DC-DC Converter
The MYMGK1R820 series from Murata are miniature Mono Block type Non-isolated Point-of-Load (PoL) DC-DC power converters for embedded applications. The tiny form factor measure only 10.5 x 9.0 x 5.6 mm. Applications include powering FPGA/CPU’s, Datacom/telecom systems, Distributed Bus Architectures (DBA), programmable logic and mixed voltage systems.
The converters have input voltage ranges of 4.5 V dc to 5.5 V dc (*FRSR) or 8.0 V dc to 14 V dc (*ERSR) and a maximum output current of 20 Amps. Based on a fixed frequency synchronous buck converter switching topology, this high-power conversion efficient PoL module features programmable output voltage 0.7 V to 1.8 V, On/Off control and Power Good signal output. These converters also include under voltage lock out UVLO), output short circuit protection and overcurrent protection.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
€ 7,50
tk (ilma käibemaksuta)
€ 9,15
tk (koos käibemaksuga)
1
€ 7,50
tk (ilma käibemaksuta)
€ 9,15
tk (koos käibemaksuga)
1
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
MurataOutput Voltage
1.8V dc
Input Voltage Range
8 → 14 V dc
Power Rating
36W
Input Voltage Nominal
12 V dc
Output Current
20A
Mounting Type
Surface Mount
Number of Outputs
1
Width
9mm
Depth
5.6mm
Length
10.5mm
Series
MGK
Load Regulation
±1%
Minimum Temperature
-40°C
Efficiency
87.8%
Maximum Temperature
+85°C
Standards Met
CSA-C22.2 No. 60950-1, EN 60950, IEC, IEC/EN 60950-1, UL, UL 60950-1
Toote üksikasjad
Murata Mono Block 20A DC-DC Converter
The MYMGK1R820 series from Murata are miniature Mono Block type Non-isolated Point-of-Load (PoL) DC-DC power converters for embedded applications. The tiny form factor measure only 10.5 x 9.0 x 5.6 mm. Applications include powering FPGA/CPU’s, Datacom/telecom systems, Distributed Bus Architectures (DBA), programmable logic and mixed voltage systems.
The converters have input voltage ranges of 4.5 V dc to 5.5 V dc (*FRSR) or 8.0 V dc to 14 V dc (*ERSR) and a maximum output current of 20 Amps. Based on a fixed frequency synchronous buck converter switching topology, this high-power conversion efficient PoL module features programmable output voltage 0.7 V to 1.8 V, On/Off control and Power Good signal output. These converters also include under voltage lock out UVLO), output short circuit protection and overcurrent protection.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products