Osram 250 W Clear Tubular SON-T Sodium Lamp, GES/E40, 2000K, 46mm
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
OsramWattage
250 W
Lamp Base
GES/E40
Lamp Shape
Tubular
SON Type
SON-T
Lamp Finish
Clear
Length
257 mm
Diameter
46mm
Luminosity
33200 lm
Luminous Efficacy
133lm/W
Colour Rendering
25
Colour Temperature
2000K
Series
VIALOX
Toote üksikasjad
Discharge SON Lamps
These lamps combine high efficiency and long life with an improvement in colour appearance and rendering compared with low pressure lamps. SON lamps emit a golden-white light. The SON-T lamp, with its clear tubular outer envelope, lends itself to applications that demand precise optical control, e.g. floodlighting. The SON-E lamp, with its elliptical glass bulb, inside which a white diffusing coating is applied, suits other applications where such accuracy of light control is not so essential. An ignitor (internal or external) is used to supply the high voltage necessary for lamp strike up. Reliable strike up (when hot, less than 60 seconds) thus is ensured, and a simple choke is used to stop excessive voltage rise. The run-up time can be up to 6 minutes when cold.
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
€ 47,10
tk (ilma käibemaksuta)
€ 57,46
tk (koos käibemaksuga)
1
€ 47,10
tk (ilma käibemaksuta)
€ 57,46
tk (koos käibemaksuga)
1
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
OsramWattage
250 W
Lamp Base
GES/E40
Lamp Shape
Tubular
SON Type
SON-T
Lamp Finish
Clear
Length
257 mm
Diameter
46mm
Luminosity
33200 lm
Luminous Efficacy
133lm/W
Colour Rendering
25
Colour Temperature
2000K
Series
VIALOX
Toote üksikasjad
Discharge SON Lamps
These lamps combine high efficiency and long life with an improvement in colour appearance and rendering compared with low pressure lamps. SON lamps emit a golden-white light. The SON-T lamp, with its clear tubular outer envelope, lends itself to applications that demand precise optical control, e.g. floodlighting. The SON-E lamp, with its elliptical glass bulb, inside which a white diffusing coating is applied, suits other applications where such accuracy of light control is not so essential. An ignitor (internal or external) is used to supply the high voltage necessary for lamp strike up. Reliable strike up (when hot, less than 60 seconds) thus is ensured, and a simple choke is used to stop excessive voltage rise. The run-up time can be up to 6 minutes when cold.