Parker Hydraulic End Nut 4BMTXS

RS tootekood: 302-8089Bränd: ParkerTootja Part nr.: 4BMTXS
brand-logo
View all in Hydraulic Fittings

Tehnilised dokumendid

Spetsifikatsioonid:

Brand

Parker

Hydraulic Fitting Type

Hydraulic End Nut

Material

Steel

Finish

Zinc Plated

Maximum Operating Pressure

350bar

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

+120°C

Toote üksikasjad

End Nut

Flared Tube Fittings

Triple-Lok 37° flared fittings are for use with metric tube. Their simplicity, compact design and ease of assembly have led to their widespread choice for applications that use fluid power in motion control. The steel fittings are ideally suited for low and medium pressure applications up to 350 bar nominal pressure and have an operating temperature range of -40°C to +120°C. Their design is simple. The flaring tool vice and flaring pins (available separately) create a seal and hold fluid under pressure in the system. The tube end is flared to 37° and clamped between the fitting nose and the sleeve when the nut is tightened. This provides an effective single seal point between fitting nose and tube flare. The Parker Triple-Lok fitting consists of three components: fitting body; tube nut; sleeve. For steel fittings it is recommended that seamless drawn steel tubes to DIN 2391/C are used.

Lao andmed ajutiselt ei ole saadaval.

Palun kontrollige hiljem uuesti.

Lao andmed ajutiselt ei ole saadaval.

€ 1,40

tk (pakis 5) (ilma käibemaksuta)

€ 1,708

tk (pakis 5) (koos käibemaksuga)

Parker Hydraulic End Nut 4BMTXS

€ 1,40

tk (pakis 5) (ilma käibemaksuta)

€ 1,708

tk (pakis 5) (koos käibemaksuga)

Parker Hydraulic End Nut 4BMTXS
Lao andmed ajutiselt ei ole saadaval.

Tehnilised dokumendid

Spetsifikatsioonid:

Brand

Parker

Hydraulic Fitting Type

Hydraulic End Nut

Material

Steel

Finish

Zinc Plated

Maximum Operating Pressure

350bar

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

+120°C

Toote üksikasjad

End Nut

Flared Tube Fittings

Triple-Lok 37° flared fittings are for use with metric tube. Their simplicity, compact design and ease of assembly have led to their widespread choice for applications that use fluid power in motion control. The steel fittings are ideally suited for low and medium pressure applications up to 350 bar nominal pressure and have an operating temperature range of -40°C to +120°C. Their design is simple. The flaring tool vice and flaring pins (available separately) create a seal and hold fluid under pressure in the system. The tube end is flared to 37° and clamped between the fitting nose and the sleeve when the nut is tightened. This provides an effective single seal point between fitting nose and tube flare. The Parker Triple-Lok fitting consists of three components: fitting body; tube nut; sleeve. For steel fittings it is recommended that seamless drawn steel tubes to DIN 2391/C are used.