RS PRO Blue Low-Density Polyethylene Solder Sleeve 29.3mm Length 2.3 → 4.5mm Cable Diameter
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
RS ProMinimum Cable Diameter
2.3mm
Maximum Cable Diameter
4.5mm
Sleeve Length
29.3mm
Material
Low-Density Polyethylene
Dielectric Strength
1kV
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Quantity
1
Colour
Blue
Series
GAST
Shrink Temperature
>115°C
Standards Met
RoHS Compliant
Päritoluriik
China
Toote üksikasjad
RS Solder Sleeves
Heat-Shrinkable sleeves that provide strain relief, insulation, moisture resistance and protection for terminations from environmental damage. The transparent heat-shrinkable sleeve contains a pre-measured fluxed solder band and coloured hot-melt glue at each end. A labour-saving alternative to conventional wire and cable termination methods such as hand soldering or crimping. The solder sleeves are available in a range of sizes to suit cable diameters from 0.5 mm² to 22 mm², or as an assorted kit.
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
€ 55,50
1 pakk 100 tk (ilma käibemaksuta)
€ 67,71
1 pakk 100 tk (koos käibemaksuga)
1
€ 55,50
1 pakk 100 tk (ilma käibemaksuta)
€ 67,71
1 pakk 100 tk (koos käibemaksuga)
1
Osta lahtiselt
| kogus | Ühikuhind |
|---|---|
| 1 - 4 | € 55,50 |
| 5 - 49 | € 53,00 |
| 50+ | € 48,60 |
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
RS ProMinimum Cable Diameter
2.3mm
Maximum Cable Diameter
4.5mm
Sleeve Length
29.3mm
Material
Low-Density Polyethylene
Dielectric Strength
1kV
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Quantity
1
Colour
Blue
Series
GAST
Shrink Temperature
>115°C
Standards Met
RoHS Compliant
Päritoluriik
China
Toote üksikasjad
RS Solder Sleeves
Heat-Shrinkable sleeves that provide strain relief, insulation, moisture resistance and protection for terminations from environmental damage. The transparent heat-shrinkable sleeve contains a pre-measured fluxed solder band and coloured hot-melt glue at each end. A labour-saving alternative to conventional wire and cable termination methods such as hand soldering or crimping. The solder sleeves are available in a range of sizes to suit cable diameters from 0.5 mm² to 22 mm², or as an assorted kit.