RS PRO ICM135R Clamp Meter 999 A 600 V 999 V ac CAT III Non-Contact Voltage Detector
Technical Document
Specifications
Brand
RS ProProduct Type
Clamp Meter
Resistance Resolution
100mΩ
Maximum AC Voltage Measurement
999V ac
Maximum DC Voltage Measurement
600V
Maximum Resistance Measurement
400.0Ω
Model Number
ICM135R
Maximum Jaw Opening
34 mm
AC Voltage Resolution
100mV
AC Voltage Accuracy
±1 % rdg + 5 Digits
Minimum Operating Temperature
0°C
AC Current Resolution
100mA
AC Current Accuracy
±1.9 % rdg + 5 Digits
Resistance Measurement Accuracy
±1% rdg + 3 Digits Ω
DC Voltage Resolution
100 mV
Clamp Meter Type
AC Current Clamp Meter
DC Voltage Accuracy
±0.7 % rdg + 2 Digits
Maximum Operating Temperature
50°C
Width
50 mm
Height
220mm
Length
76mm
Weight
360g
Standards/Approvals
RoHS
True RMS
Yes
Functions Measured
Frequency, Resistance, Continuity, Diode Test, AC Voltage, DC Voltage, AC Current
Maximum AC Current Measurement
999A
Maximum Conductor Size
34 mm
Non-Contact Voltage Detector
Yes
Battery Type
NEDA 1604, IEC 6F22
Display Type
LCD
Battery Life
300h
Safety Category Level
CAT III
Safety Category Voltage
600V
Power Source
Battery
Country of Origin
Taiwan, Province Of China
Product details
RS PRO ICM135R True RMS Clampmeter
From the trusted RS PRO brand, this ICM133R clamp meter offers high specification performance in a rugged, low-cost unit. It has true RMS reading on AC mode to ensure accurate current measurement.
Battery-powered for maximum portability, and with a large backlit screen, this multifunction current clamp meter is ideal for on-the-go applications in almost any environment.
It is also supplied in a carry case to keep the clampmeter safe and secure during transit.
Features and Benefits
• 600 A ac measurement
• 600 V ac/dc voltage measurement
• 34 mm diameter conductor jaw capacity
• 4000 Count backlit LCD display with analogue bargraph
• True RMS reading on AC mode
• Resistance & continuity beeper < 30 Ω
• Display Hold & Min Max Function
• 10 ms Peak Hold on ac A & ac V
• Frequency Counter
• Auto Power Off (30 minutes)
• Separate battery compartment
• 600 V circuit protection
• Complies with EN61010 CAT III 600 V Safety Standard for industrial applications
Applications
This current clamp meter is designed for current measurement in electrical testing, and combines a digital multimeter with a clamping current sensor. The nature of the clamp means that it can fit around a wire at any point to sense AC and DC voltage as well as current. This has the advantage of allowing electricians to take a reading from a conductor without touching it, which is both more convenient and safer than other methods.
True RMS (Root Mean Square) reading has advantages over average RMS reading in that it compensates for interfering electronic loads or distorted sinewaves to give an accurate reading.
This current clamp is used for measuring high levels of current in service and maintenance applications. It can also be used when installing electrical equipment.
RS PRO aims to be your go-to brand when you need reliability, quality, and affordability. We source high-quality tools and parts from trusted sources and employ expert testing to build a brand you can rely on.
When it comes to test and measurement equipment, RS PRO has an extensive range of solutions. From electrical to environmental measurement, we offer calibrated and multi-function instruments to suit your needs.
Feature and Benefits
600 A ac measurement
600 V ac/dc voltage measurement
34 mm diameter conductor jaw capacity
4000 Count backlit LCD display with analogue bargraph
True RMS reading on AC mode
Resistance & continuity beeper < 30 Ω
Display Hold & Min Max Function
10 ms Peak Hold on ac A & ac V
Frequency Counter
Auto Power Off (30 minutes)
Separate battery compartment
600 V circuit protection
Complies with EN61010 CAT III 600 V Safety Standard for industrial applications
Supplied with
Test leads, carry case, instruction leaflet and 9 V PP3 alkaline battery
Stock information temporarily unavailable.
€ 331.00
€ 331.00 Each (Exc. Vat)
€ 410.44
€ 410.44 Each (inc. VAT)
Calibration type
No Calibration
1
€ 331.00
€ 331.00 Each (Exc. Vat)
€ 410.44
€ 410.44 Each (inc. VAT)
Stock information temporarily unavailable.
Calibration type
No Calibration
1
Technical Document
Specifications
Brand
RS ProProduct Type
Clamp Meter
Resistance Resolution
100mΩ
Maximum AC Voltage Measurement
999V ac
Maximum DC Voltage Measurement
600V
Maximum Resistance Measurement
400.0Ω
Model Number
ICM135R
Maximum Jaw Opening
34 mm
AC Voltage Resolution
100mV
AC Voltage Accuracy
±1 % rdg + 5 Digits
Minimum Operating Temperature
0°C
AC Current Resolution
100mA
AC Current Accuracy
±1.9 % rdg + 5 Digits
Resistance Measurement Accuracy
±1% rdg + 3 Digits Ω
DC Voltage Resolution
100 mV
Clamp Meter Type
AC Current Clamp Meter
DC Voltage Accuracy
±0.7 % rdg + 2 Digits
Maximum Operating Temperature
50°C
Width
50 mm
Height
220mm
Length
76mm
Weight
360g
Standards/Approvals
RoHS
True RMS
Yes
Functions Measured
Frequency, Resistance, Continuity, Diode Test, AC Voltage, DC Voltage, AC Current
Maximum AC Current Measurement
999A
Maximum Conductor Size
34 mm
Non-Contact Voltage Detector
Yes
Battery Type
NEDA 1604, IEC 6F22
Display Type
LCD
Battery Life
300h
Safety Category Level
CAT III
Safety Category Voltage
600V
Power Source
Battery
Country of Origin
Taiwan, Province Of China
Product details
RS PRO ICM135R True RMS Clampmeter
From the trusted RS PRO brand, this ICM133R clamp meter offers high specification performance in a rugged, low-cost unit. It has true RMS reading on AC mode to ensure accurate current measurement.
Battery-powered for maximum portability, and with a large backlit screen, this multifunction current clamp meter is ideal for on-the-go applications in almost any environment.
It is also supplied in a carry case to keep the clampmeter safe and secure during transit.
Features and Benefits
• 600 A ac measurement
• 600 V ac/dc voltage measurement
• 34 mm diameter conductor jaw capacity
• 4000 Count backlit LCD display with analogue bargraph
• True RMS reading on AC mode
• Resistance & continuity beeper < 30 Ω
• Display Hold & Min Max Function
• 10 ms Peak Hold on ac A & ac V
• Frequency Counter
• Auto Power Off (30 minutes)
• Separate battery compartment
• 600 V circuit protection
• Complies with EN61010 CAT III 600 V Safety Standard for industrial applications
Applications
This current clamp meter is designed for current measurement in electrical testing, and combines a digital multimeter with a clamping current sensor. The nature of the clamp means that it can fit around a wire at any point to sense AC and DC voltage as well as current. This has the advantage of allowing electricians to take a reading from a conductor without touching it, which is both more convenient and safer than other methods.
True RMS (Root Mean Square) reading has advantages over average RMS reading in that it compensates for interfering electronic loads or distorted sinewaves to give an accurate reading.
This current clamp is used for measuring high levels of current in service and maintenance applications. It can also be used when installing electrical equipment.
RS PRO aims to be your go-to brand when you need reliability, quality, and affordability. We source high-quality tools and parts from trusted sources and employ expert testing to build a brand you can rely on.
When it comes to test and measurement equipment, RS PRO has an extensive range of solutions. From electrical to environmental measurement, we offer calibrated and multi-function instruments to suit your needs.
Feature and Benefits
600 A ac measurement
600 V ac/dc voltage measurement
34 mm diameter conductor jaw capacity
4000 Count backlit LCD display with analogue bargraph
True RMS reading on AC mode
Resistance & continuity beeper < 30 Ω
Display Hold & Min Max Function
10 ms Peak Hold on ac A & ac V
Frequency Counter
Auto Power Off (30 minutes)
Separate battery compartment
600 V circuit protection
Complies with EN61010 CAT III 600 V Safety Standard for industrial applications
Supplied with
Test leads, carry case, instruction leaflet and 9 V PP3 alkaline battery