RS PRO Piston Inline Flow Switch for Liquid, 0.1 L/min Min, 0.6 L/min Max

RS tootekood: 510-0565Bränd: RS PRO
brand-logo
Kuva kõik kategoorias Vooluandurid

Tehnilised dokumendid

Spetsifikatsioonid:

Brand

RS Pro

Media Monitored

Liquid

Device Type

Piston Inline

Minimum Flow Rate

0.1 L/min

Maximum Flow Rate

0.6 L/min

Supply Voltage

200 V ac

Pipe Diameter Range

1/4 in

Connection Type

1/4 BSP

Maximum Pressure

300bar

Material

Brass

Maximum Media Temperature

+100°C

Maximum Operating Temperature

+120°C

Current Rating

1 A

Päritoluriik

Germany

Toote üksikasjad

Piston Flow Switch

Monitoring of low flow rates of liquids. A piston equipped with a magnet is displaced by the flow, this action is proportional to the flow rate against a supporting spring. A reed switch on the outside is positioned at the desired point within the control range. A signal is generated when the actual flow rate value is above or below the set value.

Lao andmed ajutiselt ei ole saadaval.

Palun kontrollige hiljem uuesti.

Lao andmed ajutiselt ei ole saadaval.

€ 364,00

tk (ilma käibemaksuta)

€ 444,08

tk (koos käibemaksuga)

RS PRO Piston Inline Flow Switch for Liquid, 0.1 L/min Min, 0.6 L/min Max

€ 364,00

tk (ilma käibemaksuta)

€ 444,08

tk (koos käibemaksuga)

RS PRO Piston Inline Flow Switch for Liquid, 0.1 L/min Min, 0.6 L/min Max
Lao andmed ajutiselt ei ole saadaval.

Tehnilised dokumendid

Spetsifikatsioonid:

Brand

RS Pro

Media Monitored

Liquid

Device Type

Piston Inline

Minimum Flow Rate

0.1 L/min

Maximum Flow Rate

0.6 L/min

Supply Voltage

200 V ac

Pipe Diameter Range

1/4 in

Connection Type

1/4 BSP

Maximum Pressure

300bar

Material

Brass

Maximum Media Temperature

+100°C

Maximum Operating Temperature

+120°C

Current Rating

1 A

Päritoluriik

Germany

Toote üksikasjad

Piston Flow Switch

Monitoring of low flow rates of liquids. A piston equipped with a magnet is displaced by the flow, this action is proportional to the flow rate against a supporting spring. A reed switch on the outside is positioned at the desired point within the control range. A signal is generated when the actual flow rate value is above or below the set value.