RS PRO Test Pin 3A
Tehnilised dokumendid
Spetsifikatsioonid:
Toote üksikasjad
RS Pro Spring Probe with Pointed Head
Brought to you under the trusted RS Pro Brand, this pointed head spring spade terminal probe is designed to be used with an appropriate receptacle, which is ordered separately. Having the probe separate from the receptacle allows easy replacement of damaged spring test probes without disturbing the wiring.
The probe is suited ideally (in development and production) for automatic test equipment (ATE) and test jigs, where fast testing of multipoint PCBs and sub-assemblies is required. Receptacles can be push fitted into the mounting plate to provide an airtight seal without the use of adhesives.
The pointed head shape is used for plated-through holes and contamination free boards. It leaves no marks or indentations.
An inserter is available for the 2.54mm pitch receptacles (See stock number 434-790.)
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
€ 3,35
tk (pakis 5) (ilma käibemaksuta)
€ 4,087
tk (pakis 5) (koos käibemaksuga)
5
€ 3,35
tk (pakis 5) (ilma käibemaksuta)
€ 4,087
tk (pakis 5) (koos käibemaksuga)
5
Osta lahtiselt
| kogus | Ühikuhind | Per Pakend |
|---|---|---|
| 5 - 20 | € 3,35 | € 16,75 |
| 25 - 45 | € 3,10 | € 15,50 |
| 50 - 95 | € 2,85 | € 14,25 |
| 100+ | € 2,60 | € 13,00 |
Tehnilised dokumendid
Spetsifikatsioonid:
Toote üksikasjad
RS Pro Spring Probe with Pointed Head
Brought to you under the trusted RS Pro Brand, this pointed head spring spade terminal probe is designed to be used with an appropriate receptacle, which is ordered separately. Having the probe separate from the receptacle allows easy replacement of damaged spring test probes without disturbing the wiring.
The probe is suited ideally (in development and production) for automatic test equipment (ATE) and test jigs, where fast testing of multipoint PCBs and sub-assemblies is required. Receptacles can be push fitted into the mounting plate to provide an airtight seal without the use of adhesives.
The pointed head shape is used for plated-through holes and contamination free boards. It leaves no marks or indentations.
An inserter is available for the 2.54mm pitch receptacles (See stock number 434-790.)