RS PRO Thermal Interface Pad, 0.127mm Thick, 2.5W/m·K, 27 x 28mm
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
RS ProDimensions
27 x 28mm
Thickness
0.127mm
Length
27mm
Width
28mm
Thermal Conductivity
2.5W/m·K
Self-Adhesive
No
Minimum Operating Temperature
-45°C
Maximum Operating Temperature
+125°C
Colour
Grey
Operating Temperature Range
-45 → +125 °C
Päritoluriik
United Kingdom
Toote üksikasjad
RS PRO Phase Change Interface Material
RS PRO phase change materials are ideal for thermal management applications. Available in this range are phase change interface materials in sheets, resistor pads and as a dispensable paste.
Phase change materials work because they change their state with changes in temperature between the heat source and the heatsink. During this process, the material stores thermal energy which is then released as the material cools. This means that the material can absorb thermal energy as the heat is generated which helps to keep the desired component cool. This improves contact between the surfaces, completely fillling air gaps and increasing heat transfer.
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
€ 1,00
tk (pakis 10) (ilma käibemaksuta)
€ 1,22
tk (pakis 10) (koos käibemaksuga)
10
€ 1,00
tk (pakis 10) (ilma käibemaksuta)
€ 1,22
tk (pakis 10) (koos käibemaksuga)
10
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
RS ProDimensions
27 x 28mm
Thickness
0.127mm
Length
27mm
Width
28mm
Thermal Conductivity
2.5W/m·K
Self-Adhesive
No
Minimum Operating Temperature
-45°C
Maximum Operating Temperature
+125°C
Colour
Grey
Operating Temperature Range
-45 → +125 °C
Päritoluriik
United Kingdom
Toote üksikasjad
RS PRO Phase Change Interface Material
RS PRO phase change materials are ideal for thermal management applications. Available in this range are phase change interface materials in sheets, resistor pads and as a dispensable paste.
Phase change materials work because they change their state with changes in temperature between the heat source and the heatsink. During this process, the material stores thermal energy which is then released as the material cools. This means that the material can absorb thermal energy as the heat is generated which helps to keep the desired component cool. This improves contact between the surfaces, completely fillling air gaps and increasing heat transfer.