TE Connectivity Straight Black, Fluid Resistant Elastomer, 43mm
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
TE ConnectivityType
Straight
Inside Diameter Primary
43mm
Inside Diameter (Primary)
43mm
Inside Diameter Secondary
43mm
Inside Diameter (Secondary)
43mm
Adhesive Lined
No
Material
Fluid Resistant Elastomer
Number of Breakouts
1
Colour
Black
Minimum Operating Temperature
-75°C
Maximum Operating Temperature
+150°C
Shrunk Diameter Primary
28.2mm
Shrunk Diameter (Primary)
28.2mm
Shrunk Diameter Secondary
9.9mm
Shrunk Diameter (Secondary)
9.9mm
Päritoluriik
Czech Republic
Toote üksikasjad
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
€ 23,50
tk (ilma käibemaksuta)
€ 28,67
tk (koos käibemaksuga)
1
€ 23,50
tk (ilma käibemaksuta)
€ 28,67
tk (koos käibemaksuga)
1
Osta lahtiselt
| kogus | Ühikuhind |
|---|---|
| 1 - 14 | € 23,50 |
| 15 - 49 | € 21,70 |
| 50+ | € 19,70 |
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
TE ConnectivityType
Straight
Inside Diameter Primary
43mm
Inside Diameter (Primary)
43mm
Inside Diameter Secondary
43mm
Inside Diameter (Secondary)
43mm
Adhesive Lined
No
Material
Fluid Resistant Elastomer
Number of Breakouts
1
Colour
Black
Minimum Operating Temperature
-75°C
Maximum Operating Temperature
+150°C
Shrunk Diameter Primary
28.2mm
Shrunk Diameter (Primary)
28.2mm
Shrunk Diameter Secondary
9.9mm
Shrunk Diameter (Secondary)
9.9mm
Päritoluriik
Czech Republic
Toote üksikasjad
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.