TE Connectivity, DuraSeal Butt Splice Connector, Red, Insulated, Tin 22 → 18 AWG

RS tootekood: 136-1900Bränd: TE ConnectivityTootja Part nr.: 967398-000
brand-logo
View all in Splice Connectors

Tehnilised dokumendid

Spetsifikatsioonid:

Splice Type

Butt

Wire Size

22 → 18 AWG

Diameter

3.7mm

Insulation

Insulated

Colour

Red

Insulation Material

Nylon

Series

Duraseal

Contact Material

Copper

Contact Plating

Tin

Päritoluriik

Mexico

Toote üksikasjad

Splices

Approvals

UL

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

Approvals

UL Listed

Lao andmed ajutiselt ei ole saadaval.

Palun kontrollige hiljem uuesti.

Lao andmed ajutiselt ei ole saadaval.

€ 730,00

1 pakk 1000 tk (ilma käibemaksuta)

€ 890,60

1 pakk 1000 tk (koos käibemaksuga)

TE Connectivity, DuraSeal Butt Splice Connector, Red, Insulated, Tin 22 → 18 AWG

€ 730,00

1 pakk 1000 tk (ilma käibemaksuta)

€ 890,60

1 pakk 1000 tk (koos käibemaksuga)

TE Connectivity, DuraSeal Butt Splice Connector, Red, Insulated, Tin 22 → 18 AWG
Lao andmed ajutiselt ei ole saadaval.

Tehnilised dokumendid

Spetsifikatsioonid:

Splice Type

Butt

Wire Size

22 → 18 AWG

Diameter

3.7mm

Insulation

Insulated

Colour

Red

Insulation Material

Nylon

Series

Duraseal

Contact Material

Copper

Contact Plating

Tin

Päritoluriik

Mexico

Toote üksikasjad

Splices

Approvals

UL

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

Approvals

UL Listed