TE Connectivity Duraseal Red Insulated Female Spade Connector, Tab, 6.35 x 0.8mm Tab Size, 0.3mm² to 0.9mm²
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
TE ConnectivityType
Tab
Series
Duraseal
Minimum Wire Size mm²
0.3mm²
Gender
Female
Maximum Wire Size mm²
0.9mm²
Tab Size
6.35 x 0.8mm
Insulation
Insulated
Minimum Wire Size AWG
22AWG
Maximum Wire Size AWG
18AWG
Termination Method
Crimp
Colour
Red
Contact Material
Brass
Contact Plating
Tin
Insulation Material
Nylon
Päritoluriik
Mexico
Toote üksikasjad
Waterproof Duraseal terminals
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
€ 1 010,00
1 pakk 1000 tk (ilma käibemaksuta)
€ 1 232,20
1 pakk 1000 tk (koos käibemaksuga)
1
€ 1 010,00
1 pakk 1000 tk (ilma käibemaksuta)
€ 1 232,20
1 pakk 1000 tk (koos käibemaksuga)
1
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
TE ConnectivityType
Tab
Series
Duraseal
Minimum Wire Size mm²
0.3mm²
Gender
Female
Maximum Wire Size mm²
0.9mm²
Tab Size
6.35 x 0.8mm
Insulation
Insulated
Minimum Wire Size AWG
22AWG
Maximum Wire Size AWG
18AWG
Termination Method
Crimp
Colour
Red
Contact Material
Brass
Contact Plating
Tin
Insulation Material
Nylon
Päritoluriik
Mexico
Toote üksikasjad
Waterproof Duraseal terminals
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed