TE Connectivity Blue PVDF Solder Sleeve 54.1mm Length 4.06 → 8.76mm Cable Diameter

RS tootekood: 136-2092Bränd: TE ConnectivityTootja Part nr.: D-110-0083
brand-logo
View all in Jootmuhvid

Tehnilised dokumendid

Spetsifikatsioonid:

Minimum Cable Diameter

4.1mm

Maximum Cable Diameter

9mm

Sleeve Length

54.1mm

Material

PVDF

Quantity

200

Colour

Blue

Series

D-110

PRICED TO CLEAR

Yes

Standards Met

ANSI J-STD-004, ANSI J-STD-006

Päritoluriik

Mexico

Toote üksikasjad

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.

Lao andmed ajutiselt ei ole saadaval.

Palun kontrollige hiljem uuesti.

Lao andmed ajutiselt ei ole saadaval.

€ 520,00

1 pakk 200 tk (ilma käibemaksuta)

€ 634,40

1 pakk 200 tk (koos käibemaksuga)

TE Connectivity Blue PVDF Solder Sleeve 54.1mm Length 4.06 → 8.76mm Cable Diameter

€ 520,00

1 pakk 200 tk (ilma käibemaksuta)

€ 634,40

1 pakk 200 tk (koos käibemaksuga)

TE Connectivity Blue PVDF Solder Sleeve 54.1mm Length 4.06 → 8.76mm Cable Diameter
Lao andmed ajutiselt ei ole saadaval.

Tehnilised dokumendid

Spetsifikatsioonid:

Minimum Cable Diameter

4.1mm

Maximum Cable Diameter

9mm

Sleeve Length

54.1mm

Material

PVDF

Quantity

200

Colour

Blue

Series

D-110

PRICED TO CLEAR

Yes

Standards Met

ANSI J-STD-004, ANSI J-STD-006

Päritoluriik

Mexico

Toote üksikasjad

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.