Tehnilised dokumendid
Spetsifikatsioonid:
Brand
TE ConnectivitySplice Type
Butt
Wire Size
18 → 16 AWG
Overall Length
38.7mm
Insulation
Insulated
Colour
Blue
Päritoluriik
Mexico
Toote üksikasjad
TE Connectivity Cold Applied In-Line Splices
Cold applied in-line splices that require no heating for installation and provide environmental sealing against moisture using a flame retardant silicone based gel sealing system and electrical isolation using a polymer outer layer. The crimp barrels of these splices are made from tin plated copper and the transparent polyvinylidene fluoride insulation sleeves have a colour coded end cap at either end. These cold applied in-line splices provide protection and sealing on all conventional MIL spec and commercial wire insulation systems.
Stock number 782-4755 is for use with a wire range of 26, 24, 22 and 20 AWG and has red colour coded caps at either end
Stock number 782-4768 is for use with a wire range of 18 to16 AWG and has blue colour coded caps at either end
Stock number 782-4759 is for use with a wire range of 14 to12 AWG and has yellow colour coded caps at either end
Standards
Meets or exceeds the following: SAE-AMS-DTL-23053/8 (Insulation sleeve), SAE-AS81824/12
Under qualification for SAE AS81824 and AS81824/12
Splices
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
€ 12,90
tk (pakis 100) (ilma käibemaksuta)
€ 15,738
tk (pakis 100) (koos käibemaksuga)
100
€ 12,90
tk (pakis 100) (ilma käibemaksuta)
€ 15,738
tk (pakis 100) (koos käibemaksuga)
100
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
TE ConnectivitySplice Type
Butt
Wire Size
18 → 16 AWG
Overall Length
38.7mm
Insulation
Insulated
Colour
Blue
Päritoluriik
Mexico
Toote üksikasjad
TE Connectivity Cold Applied In-Line Splices
Cold applied in-line splices that require no heating for installation and provide environmental sealing against moisture using a flame retardant silicone based gel sealing system and electrical isolation using a polymer outer layer. The crimp barrels of these splices are made from tin plated copper and the transparent polyvinylidene fluoride insulation sleeves have a colour coded end cap at either end. These cold applied in-line splices provide protection and sealing on all conventional MIL spec and commercial wire insulation systems.
Stock number 782-4755 is for use with a wire range of 26, 24, 22 and 20 AWG and has red colour coded caps at either end
Stock number 782-4768 is for use with a wire range of 18 to16 AWG and has blue colour coded caps at either end
Stock number 782-4759 is for use with a wire range of 14 to12 AWG and has yellow colour coded caps at either end
Standards
Meets or exceeds the following: SAE-AMS-DTL-23053/8 (Insulation sleeve), SAE-AS81824/12
Under qualification for SAE AS81824 and AS81824/12