TE Connectivity, DuraSeal Butt Splice Connector, Red, Insulated, Tin 22 → 18 AWG
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
TE ConnectivitySplice Type
Butt
Wire Size
22 → 18 AWG
Overall Length
36mm
Minimum Wire Size AWG
18AWG
Diameter
3.7mm
Minimum Wire Size (AWG)
18AWG
Insulation
Insulated
Maximum Wire Size AWG
22AWG
Maximum Wire Size (AWG)
22AWG
Colour
Red
Series
Duraseal
Contact Material
Copper
Contact Plating
Tin
Päritoluriik
Mexico
Toote üksikasjad
Splices
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
€ 0,518
tk (pakis 50) (ilma käibemaksuta)
€ 0,632
tk (pakis 50) (koos käibemaksuga)
50
€ 0,518
tk (pakis 50) (ilma käibemaksuta)
€ 0,632
tk (pakis 50) (koos käibemaksuga)
50
Osta lahtiselt
| kogus | Ühikuhind | Per Pakend |
|---|---|---|
| 50 - 200 | € 0,518 | € 25,90 |
| 250 - 1200 | € 0,468 | € 23,40 |
| 1250 - 2450 | € 0,407 | € 20,35 |
| 2500 - 4950 | € 0,364 | € 18,20 |
| 5000+ | € 0,34 | € 17,00 |
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
TE ConnectivitySplice Type
Butt
Wire Size
22 → 18 AWG
Overall Length
36mm
Minimum Wire Size AWG
18AWG
Diameter
3.7mm
Minimum Wire Size (AWG)
18AWG
Insulation
Insulated
Maximum Wire Size AWG
22AWG
Maximum Wire Size (AWG)
22AWG
Colour
Red
Series
Duraseal
Contact Material
Copper
Contact Plating
Tin
Päritoluriik
Mexico
Toote üksikasjad
Splices
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed